REAR LIGHT ASSEMBLY DISASSEMBLY

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH side and LH side.

  • The following procedure is for the LH side.

PROCEDURE


  1. REMOVE BACK-UP LIGHT BULB (for Bulb Type Back-up Light)


    1. B0070WOC01
      B006ZFL Disconnect in this Direction

      Turn the rear light socket and wire with the back-up light bulb as shown in the illustration to disconnect them as a unit.

    2. Remove the back-up light bulb from the rear light socket and wire.

  2. REMOVE REAR LIGHT SOCKET AND WIRE (for Bulb Type Back-up Light)


    1. B006XGG

      Disconnect the connector to remove the rear light socket and wire.

  3. REMOVE REAR LIGHT CORD (for LED Type Back-up Light)


    1. B006YDC

      Disconnect the connector to remove the rear light cord.

  4. REMOVE REAR LIGHT PACKING


    1. for Bulb Type Back-up Light:


      1. B0071QT

        Remove the rear light packing.

        Note


        • Be sure to remove all traces of the old rear light packing from the vehicle body.

        • Do not reuse the removed rear light packing. Be sure to install a new rear light packing to prevent water ingress.

    2. for LED Type Back-up Light:


      1. B006XED

        Remove the rear light packing.

        Note


        • Be sure to remove all traces of the old rear light packing from the vehicle body.

        • Do not reuse the removed rear light packing. Be sure to install a new rear light packing to prevent water ingress.

  5. REMOVE REAR LIGHT LENS AND BODY (for Bulb Type Back-up Light)