FOG LIGHT ASSEMBLY INSPECTION

PROCEDURE

1. INSPECT FOG LIGHT ASSEMBLY LH

   

   *a	Component without harness connected (Fog Light Assembly LH)

   
   

   1. Apply battery voltage to the fog light assembly LH and check that the light illuminates.

      OK
      Condition Specified Condition Battery positive (+) → Terminal 2 (B) Battery negative (-) → Terminal 1 (E) Fog light illuminates

      If the result is not as specified, replace the fog light assembly LH.

2. INSPECT FOG LIGHT ASSEMBLY RH

   

   *a	Component without harness connected (Fog Light Assembly RH)

   
   

   1. Apply battery voltage to the fog light assembly RH and check that the light illuminates.

      OK
      Condition Specified Condition Battery positive (+) → Terminal 2 (B) Battery negative (-) → Terminal 1 (E) Fog light illuminates

      If the result is not as specified, replace the fog light assembly RH.