AUTOMATIC HIGH BEAM MAIN SWITCH REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RHD side and LHD side.

  • The following procedure is for the LHD side.

PROCEDURE


  1. REMOVE FRONT DOOR SCUFF PLATE LH

    Click here

  2. REMOVE COWL SIDE TRIM SUB-ASSEMBLY LH

    Click here

  3. DISCONNECT FRONT DOOR OPENING TRIM WEATHERSTRIP LH

    Click here

  4. REMOVE INSTRUMENT SIDE PANEL LH

    Click here

  5. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (for LHD)

    Click here

  6. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (for RHD)

    Click here

  7. REMOVE NO. 2 METER HOOD CLUSTER

    Click here

  8. DISCONNECT HOOD LOCK CONTROL LEVER SUB-ASSEMBLY

    Click here

  9. REMOVE NO. 1 INSTRUMENT PANEL SUB-ASSEMBLY

    Click here

  10. REMOVE AUTO HIGH BEAM SWITCH


    1. for LHD:


      1. B006ZM9C01
        *a Protective Tape
        B006ZFL Remove in this Direction

        Using a screwdriver with its tip wrapped with protective tape, disengage the 2 claws and remove the auto high beam switch as shown in the illustration.

    2. for RHD:


      1. B006XE3C01
        *a Protective Tape
        B006ZFL Remove in this Direction

        Using a screwdriver with its tip wrapped with protective tape, disengage the 2 claws and remove the auto high beam switch as shown in the illustration.