Click here

HEADLIGHT ASSEMBLY(for LED Type Turn Signal Light) INSTALLATION

Click here
Click here

CAUTION / NOTICE / HINT

Tip:

  • Use the same procedure for the RH side and LH side.

  • The following procedure is for the LH side.

Click here

PROCEDURE


  1. Click here

    INSTALL HEADLIGHT ASSEMBLY


    1. B006XH8C01
      *a Connector Lock Lever
      B006ZFL Engage in this Direction

      Connect the connector and raise the connector lock lever to engage the claw and lock the connector as shown in the illustration.

    2. B006XU6C01
      B006ZFL Install in this Direction

      Engage the guide to temporarily install the headlight assembly as shown in the illustration.

    3. B0070Q8C01
      *a Bolt
      *b Screw

      Install the headlight assembly with the bolt and 3 screws.

      Bolt
      7.0 N*m 71 kgf*cm 62 in.*lbf

    4. Remove the protective tape.

  2. Click here

    INSTALL FRONT BUMPER ASSEMBLY

    Click here

  3. Click here

    PERFORM INITIALIZATION

    Click here

  4. Click here

    ADJUST HEADLIGHT AIMING

    Click here