| DTC Code | DTC Name |
|---|---|
| U0100 | Lost Communication With ECM/PCM "A" |
| U0101 | Lost Communication with TCM |
| U0120 | Lost Communication With Starter / Generator Control Module |
| U0126 | Lost Communication with Steering Angle Sensor Module |
| U0129 | Lost Communication with Brake System Control Module |
| U0151 | Lost Communication with Restraints Control Module |
| U0155 | Lost Communication with Instrument Panel Cluster (IPC) Control Module |
| U0163 | Lost Communication with Navigation Control Module |
| U0164 | Lost Communication with HVAC Control Module |
| U0199 | Lost Communication with "Door Control Module A" |
| U0200 | Lost Communication with "Door Control Module B" |
| U0208 | Lost Communication with "Seat Control Module A" |
| U0327 | Software Incompatibility with Vehicle Security Control Module |
| U1106 | Lost Communication with Electric Parking Brake Module |
| U1115 | Lost Communication with Tilt & Telescopic Module |
| U1117 | Lost Communication with Accessory Gateway |
DESCRIPTION
These DTCs are stored if a CAN communication malfunction occurs between the main body ECU (multiplex network body ECU) and other ECUs.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area | DTC Output from |
|---|---|---|---|---|
| U0100 | Lost Communication With ECM/PCM "A" | The main body ECU (multiplex network body ECU) does not receive data from the ECM for approximately 10 seconds or more. |
|
Main body ECU (multiplex network body ECU) |
| U0101 | Lost Communication with TCM | The main body ECU (multiplex network body ECU) does not receive data from the ECM for approximately 10 seconds or more. |
|
Main body ECU (multiplex network body ECU) |
| U0120 | Lost Communication With Starter / Generator Control Module | The main body ECU (multiplex network body ECU) does not receive data from the certification ECU (smart key ECU assembly) for approximately 10 seconds or more. |
|
Main body ECU (multiplex network body ECU) |
| U0126 | Lost Communication with Steering Angle Sensor Module | The main body ECU (multiplex network body ECU) does not receive data from the steering sensor for approximately 10 seconds or more. |
|
Main body ECU (multiplex network body ECU) |
| U0129 | Lost Communication with Brake System Control Module | The main body ECU (multiplex network body ECU) does not receive data from the skid control ECU (brake actuator assembly) for approximately 10 seconds or more. |
|
Main body ECU (multiplex network body ECU) |
| U0151 | Lost Communication with Restraints Control Module | The main body ECU (multiplex network body ECU) does not receive data from the airbag sensor assembly for approximately 10 seconds or more. |
|
Main body ECU (multiplex network body ECU) |
| U0155 | Lost Communication with Instrument Panel Cluster (IPC) Control Module | The main body ECU (multiplex network body ECU) does not receive data from the combination meter assembly for approximately 10 seconds or more. |
|
Main body ECU (multiplex network body ECU) |
| U0163 | Lost Communication with Navigation Control Module | The main body ECU (multiplex network body ECU) does not receive data from the radio and display receiver assembly for approximately 10 seconds or more. |
|
Main body ECU (multiplex network body ECU) |
| U0164 | Lost Communication with HVAC Control Module | The main body ECU (multiplex network body ECU) does not receive data from the air conditioning amplifier assembly for approximately 10 seconds or more. |
|
Main body ECU (multiplex network body ECU) |
| U0199 | Lost Communication with "Door Control Module A" | The main body ECU (multiplex network body ECU) does not receive data from the outer mirror control ECU assembly RH for approximately 10 seconds or more. |
|
Main body ECU (multiplex network body ECU) |
| U0200 | Lost Communication with "Door Control Module B" | The main body ECU (multiplex network body ECU) does not receive data from the outer mirror control ECU assembly LH for approximately 10 seconds or more. |
|
Main body ECU (multiplex network body ECU) |
| U0208 | Lost Communication with "Seat Control Module A" | The main body ECU (multiplex network body ECU) does not receive data from the position control ECU and switch assembly (driver seat) for approximately 10 seconds or more. |
|
Main body ECU (multiplex network body ECU) |
| U0327 | Software Incompatibility with Vehicle Security Control Module | The main body ECU (multiplex network body ECU) does not receive data from the certification ECU (smart key ECU assembly) for approximately 10 seconds or more. |
|
Main body ECU (multiplex network body ECU) |
| U1106 | Lost Communication with Electric Parking Brake Module | The main body ECU (multiplex network body ECU) does not receive data from the skid control ECU (brake actuator assembly) for approximately 10 seconds or more. |
|
Main body ECU (multiplex network body ECU) |
| U1115 | Lost Communication with Tilt & Telescopic Module | The main body ECU (multiplex network body ECU) does not receive data from the multiplex tilt and telescopic ECU for approximately 10 seconds or more. |
|
Main body ECU (multiplex network body ECU) |
| U1117 | Lost Communication with Accessory Gateway | The main body ECU (multiplex network body ECU) does not receive data from the option connector (bus buffer ECU) for approximately 10 seconds or more. |
|
Main body ECU (multiplex network body ECU) |
PROCEDURE
CLEAR DTC
Connect the GTS to the DLC3.
Turn the ignition switch to ON.
Turn the GTS on.
Enter the following menus: Body Electrical / Main Body / Trouble Codes.
Clear the DTCs.
| Result | ||
|---|---|---|
|
| NEXT |
|
CHECK FOR DTC
Connect the GTS to the DLC3.
Turn the ignition switch to ON.
Wait 20 seconds or more.
Turn the GTS on.
Enter the following menus: Body Electrical / Main Body / Trouble Codes.
Check for DTCs.
| OK |
|---|
| DTCs are not output. |
| Result | |||
|---|---|---|---|
|
| OK |
|
USE SIMULATION METHOD TO CHECK Click here |
| NG |
|
GO TO CAN COMMUNICATION SYSTEM Click here |