LIGHTING SYSTEM(w/o Automatic Headlight Beam Level Control System) OPERATION CHECK


  1. AUTOMATIC LIGHT CONTROL SYSTEM OPERATION CHECK

    Note

    Make sure that the customize settings are set to default when performing the automatic light control system operation check.

    Click here


    1. Turn the ignition switch to ON.

    2. Turn the light control switch to the AUTO position.

    3. Cover the automatic light control sensor.

    4. Check that the taillights and low beam headlights come on.

    5. Uncover the automatic light control sensor.

    6. Check that the low beam headlights and taillights turn off.

  2. LIGHT AUTO TURN-OFF SYSTEM OPERATION CHECK


    1. Close all of the doors.

    2. Turn the ignition switch to ON.

    3. Turn the taillights, low beam headlights, high beam headlights, front fog lights* and rear fog lights on.

    4. Turn the ignition switch off.

    5. Open the driver door.

    6. Check that all of the lights turn off immediately.


      • *: w/ Front Fog Light

  3. DAYTIME RUNNING LIGHT SYSTEM OPERATION CHECK


    1. Start the engine.

    2. Turn the light control switch to the tail or AUTO position (with the low beam headlights not turned on via the automatic light control system).

    3. Release the parking brake.

    4. Check that the daytime running lights come on.