Click here

LIGHTING SYSTEM(w/ Automatic Headlight Beam Level Control System), Diagnostic DTC:B2414

Click here
Click here
DTC Code DTC Name
B2414 Steering Position Sensor
Click here

DESCRIPTION

The headlight ECU sub-assembly LH receives steering angle signals from the steering sensor via CAN communication and performs light control.

DTC No. Detection Item DTC Detection Condition Trouble Area DTC Output from
B2414 Steering Position Sensor
  • Detection condition:

  • The ignition switch is ON.


  • Malfunction status:

  • Sensor malfunction signals are continuously received from the steering sensor


  • Malfunction duration:

  • 10 seconds or more

 Vehicle stability control system Headlight ECU sub-assembly LH
Table 1. *1 Steering Sensor *2 Headlight ECU Sub-assembly LH *3 CAN communication Line
Click here

WIRING DIAGRAM

Click here

PROCEDURE


  1. Click here

    CLEAR DTC


    1. Connect the GTS to the DLC3.

    2. Turn the ignition switch to ON.

    3. Turn the GTS on.

    4. Enter the following menus: Body Electrical / HL AutoLeveling / Trouble Codes.

    5. Clear the DTCs.


      1. Body Electrical > HL AutoLeveling > Clear DTCs


      Result
      Proceed to
      NEXT

  2. Click here

    CHECK FOR DTC


    1. Connect the GTS to the DLC3.

    2. Turn the ignition switch to ON.

    3. Wait 10 seconds or more.

    4. Turn the GTS on.

    5. Enter the following menus: Body Electrical / HL AutoLeveling / Trouble Codes.

    6. Check for DTCs.


      1. Body Electrical > HL AutoLeveling > Trouble Codes


      OK
      DTC B2414 is not output.
      Result
      Proceed to
      OK
      NG