LIGHTING SYSTEM(w/ Automatic Headlight Beam Level Control System) CUSTOMIZE PARAMETERS


  1. CUSTOMIZE LIGHTING SYSTEM (EXT)

    Note


    • When the customer requests a change in a function, first make sure that the function can be customized.

    • Be sure to make a note of the current settings before customizing.

    • When troubleshooting a function, first make sure that the function is set to the default setting.

    Tech Tips

    The following items can be customized.


    1. Customizing with the GTS


      1. Connect the GTS to the DLC3.

      2. Turn the ignition switch to ON.

      3. Turn the GTS on.

      4. Enter the following menus: Customize Setting / Light Control, Warning or Illuminated Entry.

      5. Select the setting by referring to the table below.


        Light Control
        Tester Display Description Default Setting ECU
        Response Time Changes the delay timing of lighting the taillights when going into a tunnel when the light control switch is in the AUTO position.*1 Normal 0:Normal,1:Long Main Body ECU (Multiplex Network Body ECU)
        Disp Ex ON Sen Changes the ambient brightness level required to dim the lights such as the indicator lights of the combination meter, A/C indicator light and clock.*A NORMAL 000:NORMAL,001:DARK2,010:DARK1,011:LIGHT1,100:LIGHT2 Main Body ECU (Multiplex Network Body ECU)
        Disp Ex OFF Sen Changes the ambient brightness level required to cancel the dimming of the lights such as the indicator lights of the combination meter, A/C indicator light and clock.*B NORMAL 000:NORMAL,001:DARK2,010:DARK1,011:LIGHT1,100:LIGHT2 Main Body ECU (Multiplex Network Body ECU)
        Light Auto OFF Delay Keeps the headlights on for a certain period of time after turning the ignition switch off and closing all of doors with the low beam headlights on.*2 30 s 00:OFF,01:30 s,10:60 s,11:90 s Main Body ECU (Multiplex Network Body ECU)
        Sensitivity Adjusts the sensitivity of the automatic light control system.*C Normal 000:Normal,001:Dark2,010:Dark1,011:Light1,100:Light2 Main Body ECU (Multiplex Network Body ECU)
        Tail Remind Buzzer Function Sounds a buzzer when the driver door is opened with the light control switch in the tail or head position. ON 0:OFF,1:ON Main Body ECU (Multiplex Network Body ECU)

        • *1: Although this item is displayed on the GTS, it is not applicable to this vehicle.

        • *2: w/ Delay Function

        Tech Tips

        The sensitivity adjustment may be difficult to confirm. Check by driving the vehicle.


        • *A

          B006ZLAE01

        • *B

          B006ZLAE02

        • *C

          B006ZLAE03

        Warning
        Tester Display Description Default Setting ECU
        Lane Change Flashing Times Adjust Function to change the lane change flashing times. 3 $00:OFF,$01:3,$02:4,$03:5,$04:6,$05:7 Combination Meter Assembly

        Illuminated Entry
        Tester Display Description Default Setting ECU
        Mirr-Foot-Lgt Approached/Exterior Light Approached Illuminates the door mirror foot lights when a key enters any actuation area around the doors.* ON 0:OFF,1:ON Main Body ECU (Multiplex Network Body ECU)
        Mirr-Foot-Lgt Unlocked/Exterior Light Unlocked Illuminates the door mirror foot lights when the doors are unlocked using a mechanical key or door control transmitter.* ON 0:OFF,1:ON Main Body ECU (Multiplex Network Body ECU)

        • *: Although this item is displayed on the GTS, it is not applicable to this vehicle.

    2. Customizing with the multi-display


      1. Turn the ignition switch to ON.

      2. Enter the following menus: MENU / Setup / Vehicle / Vehicle customization / Lights settings. (Type A)

      3. Enter the following menus: MENU / Setup / Vehicle / Vehicle customisation / Lights settings. (Type B)

      4. Select the setting by referring to the table below.

        Display Default Content Setting Relevant ECU
        Headlights auto-on sensitivity 0 Adjusts the sensitivity of the automatic light control system.*A -2, -1, 0, +1 or +2 Main Body ECU (Multiplex Network Body ECU)
        Headlights auto-off timer* 30 sec. Keeps the headlights on for a certain period of time after turning the ignition switch off and closing all of doors with the low beam headlights on. Off, 30 sec., 60 sec. or 90 sec. Main Body ECU (Multiplex Network Body ECU)

        • *: w/ Delay Function

        Tech Tips

        The sensitivity adjustment may be difficult to confirm. Check by driving the vehicle.


        • *A

          B006ZLAE05
          *a Sensitivity of the automatic light control system
          *b Dark
          *c Bright
          *d Setting