WASHER MOTOR REMOVAL

PROCEDURE


  1. REMOVE FRONT WHEEL RH

    Click here

  2. REMOVE FRONT WHEEL OPENING EXTENSION PAD RH


    1. B004NU5

      Remove the 3 screws and front wheel opening extension pad RH.

  3. REMOVE FRONT FENDER LINER RH


    1. B004NZA

      Remove the 6 screws.

    2. B004HXUC01
      *a Protective Tape

      Remove the clip.

    3. Using a screwdriver, disengage the 2 claws.

      Tech Tips

      Tape the screwdriver tip before use.

    4. B004LAZ

      Remove the 11 clips and front fender liner RH.

  4. DRAIN WASHER FLUID


    1. B004M9C

      Disconnect the washer hose from the windshield washer motor and pump assembly, and drain the washer fluid.

      Tech Tips

      Use a container to collect the washer fluid.

  5. REMOVE WINDSHIELD WASHER MOTOR AND PUMP ASSEMBLY


    1. B004NNXC01
      B006ZFL Remove in this Direction

      Disconnect the connector.

    2. Remove the windshield washer motor and pump assembly as shown in the illustration.