OUTER REAR VIEW MIRROR INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH side and LH side.

  • The following procedure is for the LH side.

PROCEDURE


  1. INSTALL OUTER REAR VIEW MIRROR ASSEMBLY WITH COVER


    1. Engage the 2 guides and claw.

    2. Install the outer rear view mirror assembly with cover with the 3 nuts.

      Torque:
      8.0 N*m  { 82 kgf*cm, 71 in.*lbf }

    3. Engage the clamp.

  2. INSTALL OUTER MIRROR INSTALL HOLE COVER


    1. Engage the clip and 2 claws.

    2. Install the outer mirror install hole cover with the screw.

    3. Engage the clamp.

    4. Connect the connector.

  3. INSTALL HOLE PLUG


    1. Install the hole plug.

  4. INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY

    Click here

  5. INSTALL COURTESY LIGHT ASSEMBLY

    Click here

  6. INSTALL FRONT ARMREST ASSEMBLY

    Click here

  7. INSTALL MULTIPLEX NETWORK MASTER SWITCH ASSEMBLY WITH FRONT DOOR UPPER ARMREST BASE PANEL (for Driver Side)

    Click here

  8. INSTALL POWER WINDOW REGULATOR SWITCH ASSEMBLY WITH FRONT DOOR UPPER ARMREST BASE PANEL (for Front Passenger Side)

    Click here

  9. INSTALL FRONT DOOR ARMREST COVER SUB-ASSEMBLY

    Click here

  10. INSTALL FRONT DOOR LOWER FRAME BRACKET GARNISH

    Click here