POWER MIRROR CONTROL SYSTEM(w/ Memory) SYSTEM DESCRIPTION


  1. POWER MIRROR CONTROL SYSTEM (w/ Memory) DESCRIPTION


    1. This system has the following functions: electrical remote control mirror function, memory and reactivation function, reverse shift-linked function and reverse shift-linked mirror position memorization function.

  2. FUNCTION OF MAIN COMPONENT

    Component Function
    Outer rear view mirror assembly Vertical mirror motor Receives a signal from the outer mirror control ECU assembly and adjusts the mirror surface position vertically.
    Horizontal mirror motor Receives a signal from the outer mirror control ECU assembly and adjusts the mirror surface position horizontally.
    Mirror position sensor Detects the mirror surface position. This information is sent to the outer mirror control ECU assembly.
    Outer mirror switch assembly Mirror select switch Consists of individual R and L switches. One must be selected to operate the mirror adjust switch or outer mirror switch assembly.
    Mirror adjust switch

    Mirror R and L signals are sent to each outer mirror control ECU assembly from the mirror select switch.

    After turning the mirror select switch R or L switch, on the right, left, up and down control switches can be operated to change the angle of the mirror.
    Seat memory switch

    When the seat memory M1 or M2 switch is pressed while the SET switch is being pressed, or the M1 or M2 switch is pressed within 3 seconds of the SET switch being pressed, a signal is sent to the outer mirror control ECU assembly (driver door), which records the mirror surface position.

    When the seat memory switch is pressed, a signal is sent to the outer mirror control ECU assembly (driver door) and sent to the main body ECU (multiplex network body ECU), which changes the mirror surface position to the memorized position.
    Outer mirror control ECU assembly

    Operates each mirror motor based on signals from the mirror select switch and mirror adjust switch.

    Based on information from the mirror position sensors, 2 different mirror surface positions can be memorized. By operating a seat memory switch, the mirror surface moves to the memorized position.

  3. SYSTEM OPERATION


    1. The power mirror control system (w/ Memory) has the following features.

      Function Outline
      Electrical remote control mirror function When the outer mirror switch assembly is operated, this function moves the mirror surface vertically or horizontally to enable the driver to attain an optimal mirror angle. Pressing the mirror select switch R switch operates the right side mirror, and pressing the mirror select switch L switch operates the left side mirror.
      Memory and reactivation function Stores the adjusted mirror surface position in the outer mirror control ECU assembly.
      Reverse shift-linked function

      Directs the mirror surface downward to improve visibility when driving in reverse and all of the following conditions are met:


      • The engine switch is on (IG).

      • Shift lever is moved to R.

      • The mirror select switch R or L switch is on.
      Reverse shift-linked mirror position memorization function Memorizes the mirror surface position when the outer mirror switch is operated while the reverse shift-linked function is operating (can be enabled or disabled using the customize function).