FUEL LID OPENER MOTOR ASSEMBLY REMOVAL

PROCEDURE


  1. REMOVE SPARE WHEEL COVER ASSEMBLY

    Click here

  2. REMOVE SPARE WHEEL COVER TRAY

    Click here

  3. REMOVE NO. 1 LUGGAGE COMPARTMENT TRIM HOOK

    Click here

  4. REMOVE REAR FLOOR FINISH PLATE

    Click here

  5. REMOVE LUGGAGE COMPARTMENT TRIM INNER COVER LH

    Click here

  6. REMOVE FUEL FILLER OPENING LID LOCK RETAINER


    1. B004I9FC01
      B006ZFL Turn in this Direction (1)
      B006WSJ Remove in this Direction (2)

      Turn and remove the fuel filler opening lid lock retainer as indicated by the arrows, in the order shown in the illustration.

  7. REMOVE FUEL LID LOCK WITH MOTOR ASSEMBLY


    1. B004I6L

      Disengage the clamp.

    2. Disengage the claw.

    3. Disconnect the connector to remove the fuel lid lock with motor assembly.