LUGGAGE COMPARTMENT DOOR OPENER OUTER SWITCH INSPECTION

PROCEDURE


  1. INSPECT LUGGAGE ELECTRICAL KEY SWITCH


    1. Check the switch.


      1. B004O8VC16
        *a

        Component without harness connected

        (Luggage Electrical Key Switch)

        Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        1 - 2 Pressed (ON) Below 1 Ω
        1 - 2 Not pressed (OFF) 10 kΩ or higher

        If the result is not as specified, replace the luggage electrical key switch.