LUGGAGE COMPARTMENT DOOR SUPPORT INSTALLATION

CAUTION / NOTICE / HINT

CAUTION:

After installing the luggage compartment door support assembly, use your hand to open and close the luggage door. Make sure the luggage door can open and close smoothly.

PROCEDURE


  1. INSTALL LUGGAGE COMPARTMENT DOOR SUPPORT ASSEMBLY

    Note


    • Avoid touching the piston rod as much as possible to prevent foreign matter from attaching to it. Be sure to hold the cylinder while servicing.

    • Do not wear cotton gloves or other similar materials when handling the piston rod. Fibers may attach to the rod and result in gas leaks.

    • Do not apply any horizontal load to the luggage compartment door support assembly in order to prevent the piston rod from deforming.


    1. B004INBC01
      B006ZFL Install in this Direction (1)
      B006WSJ Install in this Direction (2)

      Engage the guide as indicated by the arrows, in the order shown in the illustration.

    2. B004HZV

      Engage the ball joint to install the luggage compartment door support assembly.

      Note

      Install the luggage compartment door support assembly while supporting the luggage door by hand.

    3. Check that the ball joint is engaged securely and the luggage compartment door support assembly cannot be pulled off.

  2. INSTALL LUGGAGE DOOR HINGE SUPPORT BUSH


    1. Engage the 2 claws to install the luggage door hinge support bush.

      Tech Tips

      Use the same procedure for the RH side and LH side.

  3. INSTALL BACK DOOR STAY SPRING


    1. B004KVQC01
      *a Alignment Mark (Blue)

      Engage the 2 guides to install the back door stay spring.

      Note

      Make sure that the alignment mark (blue) is on the rear inner side.

      Tech Tips

      Use the same procedure for the RH side and LH side.

  4. INSTALL LUGGAGE COMPARTMENT TRIM INNER COVER LH


    1. Engage the 2 fasteners to install the luggage compartment trim inner cover LH.

    2. Install the 2 clips.

  5. INSTALL LUGGAGE COMPARTMENT TRIM INNER COVER RH


    1. Engage the 2 fasteners to install the luggage compartment trim inner cover RH.

    2. Install the 2 clips.

  6. INSTALL REAR FLOOR FINISH PLATE


    1. B004I7VC01
      B006ZFL Install in this Direction

      Engage the 4 claws and 8 guides to install the rear floor finish plate as shown in the illustration.

    2. Install the 4 clips.

  7. INSTALL LUGGAGE COMPARTMENT DOOR STRIKER COVER


    1. B004I2OC01
      B006ZFL Install in this Direction

      Engage the 2 claws to install the luggage compartment door striker cover as shown in the illustration.

  8. INSTALL NO. 1 LUGGAGE COMPARTMENT TRIM HOOK


    1. B004KS3

      Engage the guide and claw to install the No. 1 luggage compartment trim hook.

      Tech Tips

      Use the same procedure for the RH side and LH side.

  9. INSTALL SPARE WHEEL COVER TRAY


    1. Install the spare wheel cover tray.

  10. INSTALL SPARE WHEEL COVER ASSEMBLY


    1. Install the spare wheel cover assembly.