SLIDING ROOF SWITCH ASSEMBLY INSPECTION

PROCEDURE


  1. INSPECT PANORAMIC MOON ROOF SWITCH (ROOF CONSOLE BOX SUB-ASSEMBLY)


    1. B0071B2C04
      *a

      Component without harness connected

      (Panoramic Moon Roof Switch (Roof Console Box Sub-assembly))
      *b Sliding Roof Switch
      *c Tilt Switch
      *d Roof Sunshade Switch

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      5 - 15 Sliding roof switch slid backward Below 100 Ω
      5 - 15 Sliding roof switch not slid backward 1 kΩ or higher
      4 - 15 Sliding roof switch slid forward Below 100 Ω
      4 - 15 Sliding roof switch not slid forward 1 kΩ or higher
      19 - 15 Tilt switch pressed Below 100 Ω
      19 - 15 Tilt switch not pressed 1 kΩ or higher
      3 - 15 Roof sunshade switch slid backward Below 100 Ω
      3 - 15 Roof sunshade switch not slid backward 1 kΩ or higher
      18 - 15 Roof sunshade switch slid forward Below 100 Ω
      18 - 15 Roof sunshade switch not slid forward 1 kΩ or higher

      If the result is not as specified, replace the panoramic moon roof switch (roof console box sub-assembly).