PANORAMIC MOON ROOF SYSTEM CUSTOMIZE PARAMETERS


  1. CUSTOMIZE PANORAMIC MOON ROOF SYSTEM

    Note


    • When the customer requests a change in a function, first make sure that the function can be customized.

    • Be sure to make notes of the current settings before customizing.

    • When troubleshooting a function, first make sure that the function is set to the default setting.

    Tech Tips

    The following items can be customized.


    1. Customizing with the GTS


      1. Connect the GTS to the DLC3.

      2. Turn the ignition switch to ON.

      3. Turn the GTS on.

      4. Enter the following menus: Customize Setting / Power Window.

      5. Select the setting by referring to the table below.


        Power Window
        Tester Display Description Default Setting ECU
        Door Key P/W Up Function to close the power windows and sliding roof using the mechanical key OFF 0:OFF,1:ON Main body ECU (Multiplex network body ECU)
        Door Key P/W Down Function to open the power windows and sliding roof using the mechanical key OFF 0:OFF,1:ON Main body ECU (Multiplex network body ECU)
        P/W Up W/ Transmit Function to close the power windows and sliding roof using the wireless transmitter* OFF 0:OFF,1:ON Main body ECU (Multiplex network body ECU)
        P/W Down W/ Transmit Function to open the power windows and sliding roof using the wireless transmitter* OFF 0:OFF,1:ON Main body ECU (Multiplex network body ECU)

        • *: w/o Canister Pump Module

      6. Enter the following menus: Customize Setting / Slide Roof.

      7. Select the setting by referring to the table below.


        Slide Roof
        Tester Display Description Default Setting ECU
        Front SW Auto Operation This function is used to enable or disable auto operation function. ON 0:OFF,1:ON Sliding roof ECU (Sliding roof drive gear assembly)

      8. Enter the following menus: Customize Setting / Security.

      9. Select the setting by referring to the table below.


        Security
        Tester Display Description Default Setting ECU
        Slide Roof Open Warning This function is used to enable or disable the sliding roof open warning. ON 0:OFF,1:ON Main body ECU (Multiplex network body ECU)