HOOD LOCK CONTROL CABLE ASSEMBLY REMOVAL

PROCEDURE


  1. REMOVE FRONT WHEEL LH (for LHD)

    Click here

  2. REMOVE FRONT WHEEL RH (for RHD)

    Click here

  3. REMOVE FRONT WHEEL OPENING EXTENSION PAD LH (for LHD)

    Tech Tips

    Use the same procedure as for the RH side.

    Click here

  4. REMOVE FRONT WHEEL OPENING EXTENSION PAD RH (for RHD)

    Click here

  5. REMOVE FRONT FENDER LINER LH (for LHD)

    Tech Tips

    Use the same procedure as for the RH side.

    Click here

  6. REMOVE FRONT FENDER LINER RH (for RHD)

    Click here

  7. REMOVE COOL AIR INTAKE DUCT SEAL

    Click here

  8. REMOVE HOOD LOCK ASSEMBLY


    1. w/ Engine Hood Courtesy Switch:


      1. B006YQ8

        Disconnect the connector.

    2. for LHD:


      1. B00709SC01
        *a Protective Tape

        Using a screwdriver with its tip wrapped with protective tape, remove the hood lock nut cap.

      2. B0070T9C01
        *1 Hood Lock Bolt

        Remove the 2 bolts and hood lock bolt.

      3. B007190

        Disconnect the hood lock control cable assembly to remove the hood lock assembly.

    3. for RHD:


      1. B006ZF5

        Disconnect the connector.

      2. B006ZX2C02
        *a Protective Tape

        Using a screwdriver with its tip wrapped with protective tape, remove the hood lock nut cap.

      3. B0070S6C02
        *1 Hood Lock Bolt

        Remove the 2 bolts and hood lock bolt.

      4. B006XCD

        Disconnect the hood lock control cable assembly to remove the hood lock assembly.

  9. REMOVE FRONT DOOR SCUFF PLATE LH (for LHD)

    Click here

  10. REMOVE COWL SIDE TRIM SUB-ASSEMBLY LH (for LHD)

    Click here

  11. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (for LHD)

    Click here

  12. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (for RHD)

    Click here

  13. DISCONNECT HOOD LOCK CONTROL LEVER SUB-ASSEMBLY

    Click here

  14. REMOVE HOOD LOCK CONTROL LEVER SUB-ASSEMBLY


    1. B006YRU

      Disconnect the hood lock control cable assembly to remove the hood lock control lever sub-assembly.

  15. REMOVE HOOD LOCK CONTROL CABLE ASSEMBLY


    1. for LHD:


      1. B00710P

        Disengage the clamp.

      2. Using a screwdriver, disengage the 4 clamps and grommet as shown in the illustration.

        B006YE3C01
        *1 Hood Lock Control Cable Assembly - -
        *a Clamp *b Grommet

        Tech Tips

        Tape the screwdriver tip before use.

      3. Pull the hood lock control cable assembly from the engine compartment to remove it.

    2. for RHD:


      1. Using a screwdriver, disengage the 4 clamps and grommet as shown in the illustration.

        B00705BC02
        *1 Hood Lock Control Cable Assembly - -
        *a Clamp *b Grommet

        Tech Tips

        Tape the screwdriver tip before use.

      2. Pull the hood lock control cable assembly from the engine compartment to remove it.