HOOD ON-VEHICLE INSPECTION

Click here

PROCEDURE

1. Click here

   INSPECT HOOD SUB-ASSEMBLY

   
   
   1. 

      Check that the clearance measurements of areas a through e are within each standard range.

      Table 1. Standard Clearance

      Area	Measurement	Area	Measurement
      a	2.8 to 6.8 mm (0.110 to 0.268 in.)	b	-2 to 2 mm (-0.0787 to 0.0787 in.)
      c	5.9 to 9.9 mm (0.232 to 0.390 in.)	d	2.5 to 5.5 mm (0.0984 to 0.217 in.)
      e	-1.5 to 1.5 mm (-0.0591 to 0.0591 in.)	-	-