ROOF HEADLINING DISASSEMBLY

PROCEDURE


  1. REMOVE NO. 2 ROOF SILENCER (for Normal Roof)


    1. Remove the No. 2 roof silencer.

      B0070B7

  2. REMOVE NO. 4 ROOF SILENCER (for Normal Roof)


    1. Remove the No. 4 roof silencer.

      B006YR2

  3. REMOVE VANITY LIGHT ASSEMBLY

    Tech Tips

    Use the same procedure for the RH side and LH side.


    1. B006XGYC01
      *1 Bulb Holder
      *a Claw (A)
      *b Claw (B)

      Disengage the 2 claws (A) and separate the bulb holder from the vanity light assembly as shown in the illustration.

    2. Disengage the claw (B) to remove the vanity light assembly.

  4. REMOVE NO. 2 ANTENNA CORD SUB-ASSEMBLY

    Click here

  5. REMOVE NO. 1 ROOF WIRE (for Normal Roof)


    1. Remove the adhesive tape from the roof headlining assembly.

      B006Y4EC01
      *A w/ Room Light Assembly *B w/ Spot Light Assembly
      B006Y8C Adhesive Tape - -

    2. Turn the 2 visor connectors counterclockwise approximately 90° and remove them from the roof headlining assembly.

      B006YJWC01
      *A w/ Room Light Assembly *B w/ Spot Light Assembly
      *C w/ EC Mirror or Pre-collision System *D for LHD with Humidity Sensor
      *a 90° - -
      B006ZFL Rotation Direction - -

    3. Disengage each clamp and remove the No. 1 roof wire from the roof headlining assembly.

  6. REMOVE NO. 1 ROOF WIRE (for Moon Roof)


    1. Remove the adhesive tape from the roof headlining assembly.

      B006YVCC01
      B006Y8C Adhesive Tape - -

    2. Turn the 2 visor connectors counterclockwise approximately 90° and remove them from the roof headlining assembly.

      B006Y1PC01
      *a 90° - -
      B006ZFL Rotation Direction - -

    3. Disengage the 5 clamps and remove the No. 1 roof wire from the roof headlining assembly.

  7. REMOVE NO. 1 ROOF WIRE (for Panoramic Moon Roof)


    1. Remove the adhesive tape from the roof headlining assembly.

      B006Z4HC01
      B006Y8C Adhesive Tape - -

    2. Turn the 2 visor connectors counterclockwise approximately 90° and remove them from the roof headlining assembly.

      B006X3KC01
      *A for LHD with Humidity Sensor - -
      *a 90° - -
      B006ZFL Rotation Direction - -

    3. Disengage each clamp and remove the No. 1 roof wire from the roof headlining assembly.