FRONT CONSOLE BOX REMOVAL

PROCEDURE

1. Click here

   REMOVE NO. 1 METER HOOD CLUSTER

   
   
   1. 

      Protective Tape

      Apply protective tape to the area shown in the illustration.

   2. 

      	Place Hand Here
      	Remove in this Direction

      Disengage the 3 clips in the order shown in the illustration.

   3. 

      	Place Hand Here
      	Remove in this Direction

      Disengage the 4 clips and 3 guides in the order shown in the illustration.

   4. Disconnect the connector to remove the No. 1 meter hood cluster.

2. Click here

   REMOVE NO. 2 INSTRUMENT PANEL GARNISH SUB-ASSEMBLY

   
   
   1. 

      	Place Hand Here
      	Remove in this Direction

      Disengage the 5 clips in the order shown in the illustration.

   2. 

      	Place Hand Here
      	Remove in this Direction

      Disengage the 6 clips in the order shown in the illustration to remove the No. 2 instrument panel garnish sub-assembly.

3. Click here

   REMOVE INSTRUMENT PANEL FINISH PLATE GARNISH

   
   
   1. 

      Remove in this Direction

      Disengage the clip, claw and 2 guides to remove the instrument panel finish plate garnish as shown in the illustration.

4. Click here

   REMOVE LOWER CENTER INSTRUMENT PANEL FINISH PANEL

   
   
   1. 

      	Place Hand Here
      	Remove in this Direction

      Disengage the 2 clips as shown in the illustration.

   2. 

      	Place Hand Here
      	Remove in this Direction

      Disengage the 5 clips as shown in the illustration.

   3. Disengage the clamp.

   4. Disconnect each connector to remove the lower center instrument panel finish panel.

5. Click here

   REMOVE SHIFT LOCK RELEASE BUTTON COVER

   for UA80E:

   Click here

   for UB80E:

   Click here

   for U760E:

   Click here

6. Click here

   REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY

   for UA80E:

   Click here

   for UB80E:

   Click here

   for U760E:

   Click here

7. Click here

   REMOVE REAR UPPER CONSOLE PANEL SUB-ASSEMBLY

   
   

   1. Move the shift lever to N.

   2. 

      Place Hand Here

      Remove in this Direction

      Using a moulding remover, disengage the 2 claws and 2 clips as shown in the illustration.

   3. 

      Place Hand Here

      Remove in this Direction

      Disengage the 5 claws and 4 clips as shown in the illustration.

   4. Disengage the clamp.

   5. Disconnect each connector to remove the rear upper console panel sub-assembly.

8. Click here

   REMOVE SHIFT POSITION INDICATOR

   for UA80E:

   Click here

   for UB80E:

   Click here

   for U760E:

   Click here

9. Click here

   REMOVE FRONT CONSOLE BOX INSERT SUB-ASSEMBLY

   
   
   1. 

      Remove the 5 screws and front console box insert sub-assembly.

10. Click here

    REMOVE INSTRUMENT PANEL CUP HOLDER

    
    
    1. 

       Remove the 3 screws.

    2. 

       Disengage the 2 claws to remove the instrument panel cup holder.

11. Click here

    REMOVE CONSOLE REAR END PANEL SUB-ASSEMBLY

    
    
    1. 

       	Place Hand Here
       	Remove in this Direction

       Disengage the 4 clips as shown in the illustration.

    2. 

       	Place Hand Here
       	Remove in this Direction

       Disengage the 6 claws to remove the console rear end panel sub-assembly as shown in the illustration.

    3. w/ Power Outlet Socket:

       
       

       1. Disconnect the connector.

12. Click here

    REMOVE CONSOLE BOX CARPET

    
    
    1. 

       Remove in this Direction

       Remove the console box carpet as shown in the illustration.

13. Click here

    REMOVE CONSOLE BOX ASSEMBLY

    
    
    1. 

       Remove the 4 bolts, 2 screws and console box assembly.