INSTRUMENT PANEL SAFETY PAD DISASSEMBLY

PROCEDURE


  1. REMOVE INSTRUMENT PANEL PASSENGER AIRBAG ASSEMBLY

    w/o Occupant Classification System:

    Click here

    w/ Occupant Classification System:

    Click here

  2. REMOVE NO. 1 SIDE DEFROSTER NOZZLE DUCT


    1. B006YHIC01
      B006ZFL Remove in this Direction

      Remove the screw <E>.

    2. Disengage the 2 guides as shown in the illustration.

    3. B006ZEQC01
      B006ZFL Remove in this Direction

      Disengage the claw to remove the No. 1 side defroster nozzle duct as shown in the illustration.

  3. REMOVE NO. 2 SIDE DEFROSTER NOZZLE DUCT


    1. B007105C01
      B006ZFL Remove in this Direction

      Remove the 2 screws <E>.

    2. Disengage the 2 guides as shown in the illustration.

    3. B0070TYC01
      B006ZFL Remove in this Direction

      Disengage the claw to remove the No. 2 side defroster nozzle duct as shown in the illustration.

  4. REMOVE DEFROSTER NOZZLE ASSEMBLY


    1. B006YRR

      Remove the 3 screws <E> and defroster nozzle assembly.

  5. REMOVE METER MIRROR SUB-ASSEMBLY (w/ Headup Display)

    Click here

  6. REMOVE NO. 1 HEATER TO REGISTER DUCT SUB-ASSEMBLY


    1. B0070S2

      Remove the 3 screws <E> and No. 1 heater to register duct sub-assembly.

  7. REMOVE NO. 3 HEATER TO REGISTER DUCT SUB-ASSEMBLY


    1. B0071BH

      Remove the 3 screws <E> and No. 3 heater to register duct sub-assembly.

  8. REMOVE ANTENNA CORD SUB-ASSEMBLY (w/ Navigation Antenna)

    Click here

  9. REMOVE NAVIGATION ANTENNA ASSEMBLY WITH BRACKET (w/ Navigation Antenna)

    Click here

  10. REMOVE NO. 2 HEATER TO REGISTER DUCT SUB-ASSEMBLY


    1. B00707L

      Remove the 2 screws <E> and No. 2 heater to register duct sub-assembly.

  11. REMOVE AUTOMATIC LIGHT CONTROL SENSOR

    Click here

  12. REMOVE NO. 2 INSTRUMENT PANEL REGISTER ASSEMBLY


    1. B006YEK

      Disconnect the connector.

    2. B006XZG

      Remove the 6 screws <E> and No. 2 instrument panel register assembly.

  13. REMOVE NO. 3 INSTRUMENT PANEL WIRE


    1. B00706W

      Disengage the clamp to remove the No. 3 instrument panel wire.

  14. REMOVE NO. 1 METER BRACKET SUB-ASSEMBLY


    1. B00715V

      Remove the screw <E> and No. 1 meter bracket sub-assembly.

  15. REMOVE NO. 2 METER BRACKET SUB-ASSEMBLY (w/ Headup Display)


    1. B006Y9A

      Remove the screw <E> and No. 2 meter bracket sub-assembly.

  16. REMOVE NO. 1 DEFROSTER NOZZLE GARNISH


    1. Disengage the 4 clips.

      B006Y3E

    2. Disengage the 5 guides to remove the No. 1 defroster nozzle garnish.

      B006YJC

  17. REMOVE INSTRUMENT PANEL HOLE COVER (w/ Headup Display)


    1. B0070QG

      Disengage the 5 claws.

    2. B006XF3

      Disengage the 3 guides to remove the instrument panel hole cover.

  18. REMOVE NO. 1 INSTRUMENT PANEL PIN


    1. B00703Z

      Remove the 4 screws <E> and 4 No. 1 instrument panel pins.

  19. REMOVE ANTENNA CORD SUB-ASSEMBLY (for LHD)

    Click here

  20. REMOVE ANTENNA CORD SUB-ASSEMBLY (for RHD)

    Click here

  21. REMOVE AIR DUCT SUB-ASSEMBLY (w/ Ion Generator)

    for RHD:

    Click here

  22. REMOVE ION GENERATOR WITH BRACKET (w/ Ion Generator)

    Click here

  23. REMOVE NO. 4 INSTRUMENT PANEL WIRE (w/ Ion Generator)


    1. B006YYK

      Disengage the 2 clamps to remove the No. 4 instrument panel wire.

  24. REMOVE INSTRUMENT PANEL CUSHION


    1. B006XOB

      Remove the instrument panel cushion.