INSTRUMENT PANEL SAFETY PAD COMPONENTS
ILLUSTRATION
| *A | for Manual Tilt and Manual Telescopic Steering Column | *B | for Power Tilt and Power Telescopic Steering Column |
| *1 | LOWER STEERING COLUMN COVER SUB-ASSEMBLY | *2 | STEERING WHEEL ASSEMBLY |
| *3 | TURN SIGNAL SWITCH | *4 | UPPER STEERING COLUMN COVER |
| *5 | WINDSHIELD WIPER SWITCH ASSEMBLY | - | - |
 |
Tightening torque for "Major areas involving basic vehicle performance such as moving/turning/stopping": N*m (kgf*cm, ft.*lbf) | - | - |
ILLUSTRATION
| *A | w/ Front No. 3 Speaker | *B | w/o Front No. 3 Speaker |
| *C | for LHD | *D | for RHD |
| *1 | COMBINATION METER ASSEMBLY | *2 | COWL SIDE TRIM SUB-ASSEMBLY LH |
| *3 | FRONT DOOR OPENING TRIM WEATHERSTRIP LH | *4 | FRONT DOOR SCUFF PLATE LH |
| *5 | FRONT PILLAR GARNISH LH | *6 | HOOD LOCK CONTROL LEVER SUB-ASSEMBLY |
| *7 | INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY | *8 | INSTRUMENT SIDE PANEL LH |
| *9 | LOWER INSTRUMENT PANEL FINISH PANEL ASSEMBLY | *10 | LOWER NO. 1 INSTRUMENT PANEL AIRBAG ASSEMBLY |
| *11 | NO. 1 INSTRUMENT PANEL SUB-ASSEMBLY | *12 | NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY |
| *13 | NO. 2 METER HOOD CLUSTER | *14 | CLIP |
 |
N*m (kgf*cm, ft.*lbf): Specified torque | ● | Non-reusable part |
ILLUSTRATION
| *A | w/o Radio Receiver | *B | w/ Radio Receiver |
| *1 | AIR CONDITIONING CONTROL ASSEMBLY | *2 | CENTER INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY |
| *3 | INSTRUMENT CLUSTER FINISH PANEL COVER | *4 | NO. 3 INSTRUMENT PANEL REGISTER ASSEMBLY |
| *5 | RADIO AND DISPLAY RECEIVER ASSEMBLY WITH BRACKET | *6 | RADIO TUNER OPENING COVER WITH BRACKET |
ILLUSTRATION
| *A | w/o Passenger Side Knee Airbag | *B | w/ Passenger Side Knee Airbag |
| *C | w/ Front No. 3 Speaker | *D | w/o Front No. 3 Speaker |
| *1 | COWL SIDE TRIM SUB-ASSEMBLY RH | *2 | FRONT DOOR OPENING TRIM WEATHERSTRIP RH |
| *3 | FRONT DOOR SCUFF PLATE RH | *4 | FRONT PILLAR GARNISH RH |
| *5 | INSTRUMENT SIDE PANEL RH | *6 | LOWER INSTRUMENT PANEL SUB-ASSEMBLY |
| *7 | LOWER NO. 2 INSTRUMENT PANEL AIRBAG ASSEMBLY | *8 | NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY |
| *9 | CLIP | - | - |
| |
N*m (kgf*cm, ft.*lbf): Specified torque | ● | Non-reusable part |
ILLUSTRATION
| *A | for LH Side | *B | for RH Side |
| *1 | FRONT NO. 2 SPEAKER ASSEMBLY | *2 | NO. 1 INSTRUMENT PANEL GARNISH SUB-ASSEMBLY |
| *3 | NO. 1 INSTRUMENT PANEL REGISTER ASSEMBLY | *4 | NO. 1 INSTRUMENT PANEL SPEAKER PANEL |
| *5 | NO. 2 INSTRUMENT PANEL SPEAKER PANEL | - | - |
ILLUSTRATION
| *1 | INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY | - | - |
| |
N*m (kgf*cm, ft.*lbf): Specified torque | - | - |
ILLUSTRATION
| *A | w/ Ion Generator | *B | for LHD |
| *C | for RHD | *D | w/ Headup Display |
| *1 | AIR DUCT SUB-ASSEMBLY | *2 | AUTOMATIC LIGHT CONTROL SENSOR |
| *3 | DEFROSTER NOZZLE ASSEMBLY | *4 | INSTRUMENT PANEL PASSENGER AIRBAG ASSEMBLY |
| *5 | ION GENERATOR WITH BRACKET | *6 | METER MIRROR SUB-ASSEMBLY |
| *7 | NO. 1 HEATER TO REGISTER DUCT SUB-ASSEMBLY | *8 | NO. 1 METER BRACKET SUB-ASSEMBLY |
| *9 | NO. 1 SIDE DEFROSTER NOZZLE DUCT | *10 | NO. 2 HEATER TO REGISTER DUCT SUB-ASSEMBLY |
| *11 | NO. 2 INSTRUMENT PANEL REGISTER ASSEMBLY | *12 | NO. 2 METER BRACKET SUB-ASSEMBLY |
| *13 | NO. 2 SIDE DEFROSTER NOZZLE DUCT | *14 | NO. 3 HEATER TO REGISTER DUCT SUB-ASSEMBLY |
| *15 | NO. 3 INSTRUMENT PANEL WIRE | - | - |
ILLUSTRATION
| *A | w/ Headup Display | *B | w/ Ion Generator |
| *C | w/ Navigation Antenna | *D | for LHD |
| *E | for RHD | - | - |
| *1 | ANTENNA CORD SUB-ASSEMBLY | *2 | INSTRUMENT PANEL CUSHION |
| *3 | INSTRUMENT PANEL HOLE COVER | *4 | NAVIGATION ANTENNA ASSEMBLY WITH BRACKET |
| *5 | NO. 1 DEFROSTER NOZZLE GARNISH | *6 | NO. 1 INSTRUMENT PANEL PIN |
| *7 | NO. 4 INSTRUMENT PANEL WIRE | - | - |
| ● | Non-reusable part | - | - |