REAR SUNSHADE ASSEMBLY REMOVAL

PROCEDURE


  1. REMOVE REAR SEAT ASSEMBLY (for Fold Down Seat Type)

    Click here

  2. REMOVE REAR SEAT ASSEMBLY (for Reclining Seat Type)

    Click here

  3. REMOVE CENTER STOP LIGHT SET

    Click here

  4. DISCONNECT REAR SEAT OUTER BELT ASSEMBLY LH

    Click here

  5. DISCONNECT REAR SEAT OUTER BELT ASSEMBLY RH

    Tech Tips

    Use the same procedure as for the LH side.

  6. REMOVE INNER ROOF SIDE GARNISH LH

    Click here

  7. REMOVE INNER ROOF SIDE GARNISH RH

    Tech Tips

    Use the same procedure as for the LH side.

  8. REMOVE REAR SEAT SHOULDER BELT HOLE COVER

    Click here

  9. REMOVE PACKAGE TRAY TRIM PANEL ASSEMBLY

    Click here

  10. REMOVE ROOM PARTITION BOARD LH (for Fold Down Seat Type)

    Click here

  11. INSTALL ROOM PARTITION BOARD RH (for Fold Down Seat Type)

    Click here

  12. REMOVE NO. 1 UPPER BACK PANEL HOLE COVER


    1. Remove the No. 1 upper back panel hole cover.

  13. REMOVE NO. 2 PACKAGE TRAY TRIM PANEL ASSEMBLY


    1. B006YURC01
      B006ZFL Remove in this Direction

      Disengage the 3 clips as shown in the illustration.

    2. B0070O9C01
      B006ZFL Remove in this Direction

      Disengage the 5 guides to remove the No. 2 package tray trim panel assembly as shown in the illustration.

  14. REMOVE REAR WINDOW SHADE ASSEMBLY


    1. B006YZ7N01

      Disconnect the connector.

    2. Remove the 3 bolts (A).

    3. Loosen the bolt (B) and remove the rear window shade assembly.

      Note

      Bolt (B) cannot be removed from the rear window shade assembly.