RELAY ON-VEHICLE INSPECTION

PROCEDURE


  1. INSPECT MAGNETIC CLUTCH RELAY (for 2GR-FKS)

    B004HV3N01

    1. Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      3 - 5 Battery voltage not applied between terminals 1 and 2 10 kΩ or higher
      3 - 5 Battery voltage applied between terminals 1 and 2 Below 1 Ω

      • If the result is not as specified, replace the magnetic clutch relay.