COMPRESSOR(for 2GR-FKS) DISASSEMBLY

PROCEDURE


  1. REMOVE COOLER COMPRESSOR BRACKET


    1. B004N1K

      Disengage the clamp.

    2. Remove the screw and cooler compressor bracket.

  2. REMOVE MAGNET CLUTCH ASSEMBLY


    1. B004JSJN01

      Secure the compressor assembly with magnetic clutch in a vise between aluminum plates.

    2. Using SST, hold the magnet clutch hub.

      SST
      09985-00270

    3. Remove the bolt, magnet clutch hub and magnet clutch washer(s).

      Tech Tips

      There is no set number of magnet clutch washers that are used for adjusting clutch clearance.

    4. B004K7Z

      Using a snap ring expander, remove the snap ring and magnet clutch rotor.

      Note

      Do not damage the seal cover of the bearing when removing the snap ring.

    5. Disconnect the connector.

    6. B004JLG

      Using a snap ring expander, remove the snap ring and magnet clutch stator.