COMPRESSOR(for 2GR-FKS) REMOVAL

PROCEDURE

1. RECOVER REFRIGERANT FROM REFRIGERATION SYSTEM

   Click here

2. REMOVE V-RIBBED BELT

   Click here

3. REMOVE RADIATOR ASSEMBLY

   Click here

4. DISCONNECT NO. 1 COOLER REFRIGERANT DISCHARGE HOSE SUB-ASSEMBLY

   
   

   1. 

      Remove the bolt and disconnect the No. 1 cooler refrigerant discharge hose sub-assembly from the compressor assembly with magnetic clutch.

   2. Remove the O-ring from the No. 1 cooler refrigerant discharge hose sub-assembly.

      Note

      Seal the openings of the disconnected parts using vinyl tape to prevent moisture and foreign matter from entering them.

5. DISCONNECT SUCTION HOSE SUB-ASSEMBLY

   
   

   1. 

      Remove the bolt and disconnect the suction hose sub-assembly from the compressor assembly with magnetic clutch.

   2. Remove the O-ring from the suction hose sub-assembly.

      Note

      Seal the openings of the disconnected parts using vinyl tape to prevent moisture and foreign matter from entering them.

6. REMOVE COMPRESSOR ASSEMBLY WITH MAGNETIC CLUTCH

   
   

   1. 

      Disconnect each connector.

   2. Disengage each clamp.

   3. for Type A:

      
      

      1. 

         *a	Bracket
         	Bolt
         	Nut

         Remove the 2 bolts and 2 nuts, and separate the bracket.

      2. 

         Using an E8 "TORX" socket wrench, remove the 2 stud bolts.

   4. for Type B:

      
      
      1. 

         *a

         Bracket

         Remove the 4 bolts and separate the bracket.

   5. Remove the compressor assembly with magnetic clutch.