REFRIGERANT LINE REMOVAL

PROCEDURE

1. Click here

   RECOVER REFRIGERANT FROM REFRIGERATION SYSTEM

   Click here

2. Click here

   REMOVE PIPING CLAMP (for Suction Hose Sub-assembly Side)

   
   
   1. 

      *1	Suction Pipe Sub-assembly	*2	Suction Hose Sub-assembly
      *3	Piping Clamp	-	-
      *a	Press In	-	-

      While pressing the end of the suction hose sub-assembly into the end of the suction pipe sub-assembly, use pliers to squeeze together both sides of the piping clamp until it breaks apart.

      Note:
      

      • If any foreign matter is adhered to the connected parts, brush it off or use compressed air to remove it.

      • Make sure that fragments of the piping clamp do not enter the piping.

   2. Separate the suction hose sub-assembly.

      Note:

      Remove off any foreign matter from the connecting parts of the suction hose sub-assembly and suction pipe sub-assembly.

   3. Remove the 2 O-rings from the suction hose sub-assembly.

      Note:

      Seal the opening of the disconnected parts with vinyl tape to prevent entry of moisture and foreign matter.

   4. Remove the piping clamp.

3. Click here

   REMOVE PIPING CLAMP (for Air Conditioner Tube and Accessory Assembly Side)

   Click here