REAR SEAT INNER BELT ASSEMBLY(for LH Side) INSPECTION

PROCEDURE


  1. INSPECT REAR SEAT INNER WITH CENTER BELT ASSEMBLY LH


    1. Inspect the rear seat inner with center belt assembly LH (for LH).


      1. B004L98C04
        *a

        Component without harness connected

        (Rear Seat Inner with Center Belt Assembly LH (for LH))

        Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        5 - 4 Rear LH seat belt unfastened Below 1 Ω
        Rear LH seat belt fastened 10 kΩ or higher

        If the result is not as specified, replace the rear seat inner with center belt assembly LH.

    2. Inspect the rear seat inner with center belt assembly LH (for center).


      1. B004JVPC01
        *a

        Component without harness connected

        (Rear Seat Inner with Center Belt Assembly LH (for Center))

        Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        1 - 2 Rear center seat belt unfastened Below 1 Ω
        Rear center seat belt fastened 10 kΩ or higher

        If the result is not as specified, replace the rear seat inner with center belt assembly LH.