FRONT SEAT OUTER BELT ASSEMBLY INSTALLATION

CAUTION / NOTICE / HINT

PROCEDURE

1. Click here

   INSTALL FRONT SHOULDER BELT ANCHOR ADJUSTER ASSEMBLY

   
   
   1. 

      Engage the guide and temporarily install the front shoulder belt anchor adjuster assembly with the 2 bolts.

   2. Fully tighten the bolt (A) and then the bolt (B) to install the front shoulder belt anchor adjuster assembly.

      42 N*m

      428 kgf*cm

      31 ft.*lbf

2. Click here

   INSPECT FRONT SEAT OUTER BELT ASSEMBLY

   Click here

3. Click here

   INSTALL FRONT SEAT OUTER BELT ASSEMBLY

   
   
   1. 

      Engage the 2 guides and temporarily install the front seat outer belt assembly with the 2 bolts.

   2. Fully tighten the bolt (A) and then the bolt (B) to install the front seat outer belt assembly.

      Bolt (A)
      12.5 N*m	127 kgf*cm	9 ft.*lbf
      Bolt (B)
      42 N*m	428 kgf*cm	31 ft.*lbf

   3. 

      *a	Locking Button
      *b	Lock

      Connect the pretensioner connector and lock the locking button as shown in the illustration.

      Note:

      Securely lock the locking button.

   4. Connect the shoulder anchor of the front seat outer belt assembly with the nut.

      42 N*m

      428 kgf*cm

      31 ft.*lbf

   5. Check that the ELR locks.

      Note:

      This check should be performed with the front seat outer belt assembly installed to the vehicle.

      
      

      1. With the front seat outer belt assembly installed to the vehicle, check that the belt locks when it is pulled out quickly.

4. Click here

   INSTALL UPPER CENTER PILLAR GARNISH

   Click here

5. Click here

   INSTALL LOWER CENTER PILLAR GARNISH

   Click here

6. Click here

   CONNECT FRONT SEAT OUTER BELT ASSEMBLY

   
   

   1. Connect the floor anchor of the front seat outer belt assembly with the bolt.

      42 N*m

      428 kgf*cm

      31 ft.*lbf

7. Click here

   INSTALL LAP BELT OUTER ANCHOR COVER

   
   

   1. Engage the 3 claws to install the lap belt outer anchor cover.

8. Click here

   CONNECT REAR DOOR OPENING TRIM WEATHERSTRIP

   Click here

9. Click here

   INSTALL REAR DOOR SCUFF PLATE

   Click here

10. Click here

    CONNECT FRONT DOOR OPENING TRIM WEATHERSTRIP

    Click here

11. Click here

    INSTALL FRONT DOOR SCUFF PLATE

    Click here

12. Click here

    CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    for 2AR-FE:

    Click here

    for A25A-FKS:

    Click here

    for 2GR-FKS:

    Click here

13. Click here

    PERFORM DIAGNOSTIC SYSTEM CHECK

    Click here

14. Click here

    INSPECT SRS WARNING LIGHT

    Click here