FRONT SEAT INNER BELT ASSEMBLY INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH side and LH side.

  • The following procedure is for the LH side.

PROCEDURE


  1. INSTALL FRONT SEAT INNER BELT ASSEMBLY (for Driver Side)


    1. B006XJ2C01
      B006ZFL Install in this Direction

      Install the front seat belt anchor plate as shown in the illustration.

    2. B0070A1C01
      B006Y8C Protruding Part

      Install the front seat inner belt assembly with the nut.

      Torque:
      42 N*m  { 428 kgf*cm, 31 ft.*lbf }

      Note

      Do not allow the anchor part of the front seat inner belt assembly to overlap the protruding part of the separate type front seat cushion spring assembly.

    3. Engage each clamp.

    4. Connect each connector.

  2. INSTALL FRONT SEAT INNER BELT ASSEMBLY (for Front Passenger Side)


    1. B00717MC01
      B006ZFL Install in this Direction

      Install the front seat belt anchor plate as shown in the illustration.

    2. B0071QAC01
      B006Y8C Protruding Part

      Install the front seat inner belt assembly with the nut.

      Torque:
      42 N*m  { 428 kgf*cm, 31 ft.*lbf }

      Note

      Do not allow the anchor part of the front seat inner belt assembly to overlap the protruding part of the separate type front seat cushion spring assembly.

    3. w/ Wire Harness:


      1. Engage each clamp.

      2. Connect each connector.

  3. INSTALL FRONT SEAT ASSEMBLY (for Manual Seat)

    Click here

  4. INSTALL FRONT SEAT ASSEMBLY (for Power Seat)

    Click here