SEAT BELT WARNING LIGHT INSPECTION

PROCEDURE


  1. INSPECT TELLTALE LIGHT ASSEMBLY (w/ Rear Seat Belt Warning)


    1. B004J16C01
      *1 Rear seat belt warning light (Telltale Light Assembly)
      *a LH
      *b Center
      *c RH
      *d

      Component without harness connected

      (Telltale Light Assembly)

      Apply battery voltage to the connector according to the table below.

      OK
      Battery Connection Result

      Battery positive (+) - Terminal 10

      Battery negative (-) - Terminal 3

      		 Rear seat belt warning light (RH) comes on

      Battery positive (+) - Terminal 10

      Battery negative (-) - Terminal 2

      		 Rear seat belt warning light (center) comes on

      Battery positive (+) - Terminal 10

      Battery negative (-) - Terminal 1

      		 Rear seat belt warning light (LH) comes on

      If the result is not as specified, replace the telltale light assembly.