SEAT BELT WARNING SYSTEM(w/o Occupant Classification System) DATA LIST / ACTIVE TEST


  1. DATA LIST

    Note

    In the following table, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.

    Tech Tips

    Using the GTS to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.


    1. Connect the GTS to the DLC3.

    2. Turn the ignition switch to ON.

    3. Turn the GTS on.

    4. Enter the following menus: Body Electrical / Combination Meter or Main Body / Data List.

    5. Read the Data List according to the display on the GTS.


      Body Electrical > Combination Meter > Data List
      Tester Display Measurement Item Range Normal Condition Diagnostic Note
      Driver Buckle Switch Driver seat belt buckle switch ON or OFF

      ON: Driver seat belt fastened

      OFF: Driver seat belt unfastened

      		 -
      Passenger Buckle Switch Front passenger seat belt buckle switch signal ON or OFF

      ON: Front passenger seat belt not fastened

      OFF: Front passenger seat belt fastened

      		 *1
      Passenger Occupant Detection Switch Occupant detection sensor signal ON or OFF

      ON: Front passenger seat occupied

      OFF: Front passenger seat not occupied

      		 *1
      Rear Right Seat Buckle / Occupant Detection Warning Switch Rear seat inner with center belt RH buckle signal ON or OFF

      ON: Rear RH seat belt not fastened

      OFF: Rear RH seat belt fastened

      		 *2
      Rear Left Seat Buckle / Occupant Detection Warning Switch Rear seat inner with center belt LH (for LH) buckle signal ON or OFF

      ON: Rear LH seat belt (for LH) not fastened

      OFF: Rear LH seat belt (for LH) fastened

      		 *2
      Rear Center Seat Buckle / Occupant Detection Warning Switch Rear seat inner with center belt LH (for center) buckle signal ON or OFF

      ON: Rear LH seat belt (for center) not fastened

      OFF: Rear LH seat belt (for center) fastened

      		 *2
      Driver Seatbelt Warning Buzzer Function Driver seat belt warning buzzer ON or OFF Customized setting displayed -
      Passenger Seatbelt Warning Buzzer Function Front passenger seat belt warning buzzer ON or OFF Customized setting displayed *1
      Rear Right Seatbelt Warning Buzzer Function Rear RH seat belt warning buzzer ON or OFF Customized setting displayed *2
      Rear Left Seatbelt Warning Buzzer Function Rear LH seat belt warning buzzer ON or OFF Customized setting displayed *2
      Rear Center Seatbelt Warning Buzzer Function Rear center seat belt warning buzzer ON or OFF Customized setting displayed *2

      • *1: w/ Front Passenger Seat Belt Warning System

      • *2: w/ Rear Seat Belt Warning


      Body Electrical > Main Body > Data List
      Tester Display Measurement Item Range Normal Condition Diagnostic Note
      RR Door Courtesy SW Rear door courtesy light switch RH ON or OFF

      ON: Rear door RH open

      OFF: Rear door RH closed

      		 *
      RL Door Courtesy SW Rear door courtesy light switch LH ON or OFF

      ON: Rear door LH open

      OFF: Rear door LH closed

      		 *
      D Seat Buckle SW Driver seat belt buckle switch ON or OFF

      ON: Driver seat belt unfastened

      OFF: Driver seat belt fastened

      		 -

      • *: w/ Rear Seat Belt Warning

  2. ACTIVE TEST

    Tech Tips

    Using the GTS to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.


    1. Connect the GTS to the DLC3.

    2. Turn the ignition switch to ON.

    3. Turn the GTS on.

    4. Enter the following menus: Body Electrical / Combination Meter / Active Test.

    5. Perform the Active Test according to the display on the GTS.


      Body Electrical > Combination Meter > Active Test
      Tester Display Measurement Item Control Range Diagnostic Note
      Buzzer Operation (800Hz, Vol L, W/ Damping)

      Combination meter buzzer


      • Frequency: 800Hz

      • Volume: High

      • Fading tone

      		 ON -
      Buzzer Operation (800Hz, Vol L, W/O Damping)

      Combination meter buzzer


      • Frequency: 800Hz

      • Volume: High

      • Continuous tone

      		 ON -
      Buzzer Operation (800Hz, Vol S, W/ Damping)

      Combination meter buzzer


      • Frequency: 800Hz

      • Volume: Low

      • Fading tone

      		 ON -
      Buzzer Operation (800Hz, Vol S, W/O Damping)

      Combination meter buzzer


      • Frequency: 800Hz

      • Volume: Low

      • Continuous tone

      		 ON -
      Driver Side Seat Belt Warning Driver side seat belt warning light OFF/ON -
      Passenger Side Seat Belt Warning Front passenger side seat belt warning light OFF/ON Not applicable to this vehicle
      Rear Seat Belt Warning Rear seat belt warning light OFF/ON *

      • *: w/ Rear Seat Belt Warning