REAR SEAT CUSHION HEATER INSPECTION

PROCEDURE


  1. INSPECT REAR SEAT CUSHION HEATER ASSEMBLY (LH)


    1. B006X8HC01
      *a

      Component without harness connected

      (Rear Seat Cushion Heater Assembly (LH))

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      D-4 - E-1 Always Below 1 Ω
      D-3 - D-1 Seat heater temperature 20 °C (68 °F) 1.34 to 1.60 Ω
      D-3 - D-2 Seat heater temperature 20 °C (68 °F) 2.43 to 2.91 Ω
      D-5 - E-2 Always Below 1 Ω

      If the result is not as specified, replace the rear seat cushion heater assembly (LH).

  2. INSPECT REAR SEAT CUSHION HEATER ASSEMBLY (RH)


    1. B006WSTC01
      *a

      Component without harness connected

      (Rear Seat Cushion Heater Assembly (RH))

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      F-1 - G-1 Seat heater temperature 20 °C (68 °F) Below 1 Ω
      F-2 - G-2 Seat heater temperature 20 °C (68 °F) 2.43 to 2.91 Ω
      F-2 - G-3 Seat heater temperature 20 °C (68 °F) 1.34 to 1.60 Ω

      If the result is not as specified, replace the rear seat cushion heater assembly (RH).