FRONT SEAT CUSHION HEATER(for Power Seat) REMOVAL

CAUTION / NOTICE / HINT

The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed and installed, or replaced during the front seat cushion heater assembly removal/installation are shown below.

Necessary Procedures After Parts Removed/Installed/Replaced
Replaced Part or Performed Procedure Necessary Procedure Effect/Inoperative Function when Necessary Procedure not Performed Link
Disconnect cable from negative battery terminal Perform steering sensor zero point calibration Lane departure alert system (w/ Steering Control)

Click here

Pre-collision system
Memorize steering angle neutral point Parking assist monitor system

Click here

CAUTION:


  • Be sure to read Precaution thoroughly before servicing.

    Click here

  • Wear protective gloves. Sharp areas on the parts may injure your hands.

Tech Tips


  • Use the same procedure for the RH side and LH side.

  • The following procedure is for the LH side.

PROCEDURE


  1. REMOVE FRONT SEAT ASSEMBLY

    Click here

  2. DISCONNECT SEPARATE TYPE FRONT SEATBACK COVER

    Click here

  3. REMOVE FRONT SEAT FRONT CUSHION SHIELD

    Click here

  4. REMOVE FRONT SEAT CUSHION SHIELD (w/o Vertical Adjuster)

    Click here

  5. REMOVE FRONT SEAT INNER CUSHION SHIELD (w/o Vertical Adjuster)

    Click here

  6. REMOVE FRONT SEAT CUSHION SHIELD (w/ Vertical Adjuster)

    Click here

  7. REMOVE FRONT SEAT INNER CUSHION SHIELD (w/ Vertical Adjuster)

    Click here

  8. REMOVE SEPARATE TYPE FRONT SEATBACK ASSEMBLY

    Click here

  9. REMOVE SEPARATE TYPE FRONT SEAT CUSHION COVER WITH PAD

    Click here

  10. REMOVE SEPARATE TYPE FRONT SEAT CUSHION COVER

    Click here

  11. REMOVE FRONT SEAT CUSHION HEATER ASSEMBLY


    1. B006YKN

      Remove the 35 tag pins and front seat cushion heater assembly from the separate type front seat cushion cover.