REAR SEATBACK HEATER INSPECTION

PROCEDURE


  1. INSPECT REAR SEATBACK HEATER ASSEMBLY LH


    1. B006X69C01
      *a

      Component without harness connected

      (Rear Seatback Heater Assembly LH)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      R102-3 - C-3 Always Below 1 Ω
      R102-1 - C-4 Always Below 1 Ω
      R102-4 - C-1 Seat heater temperature 20 °C (68 °F) 1.18 to 1.40 Ω
      R102-4 - C-2 Seat heater temperature 20 °C (68 °F) 2.42 to 2.88 Ω
      R102-2 - C-5 Always Below 1 Ω

      If the result is not as specified, replace the rear seatback heater assembly LH.

  2. INSPECT REAR SEATBACK HEATER ASSEMBLY RH


    1. B006YO9C01
      *a

      Component without harness connected

      (Rear Seatback Heater Assembly RH)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      1 - 2 Seat heater temperature 20 °C (68 °F) 2.42 to 2.88 Ω
      1 - 3 Seat heater temperature 20 °C (68 °F) 1.17 to 1.39 Ω

      If the result is not as specified, replace the rear seatback heater assembly RH.