FRONT SEATBACK HEATER(for Power Seat) INSPECTION

PROCEDURE


  1. INSPECT FRONT SEATBACK HEATER ASSEMBLY LH


    1. B004NABC02
      *a

      Component without harness connected

      (Front Seatback Heater Assembly LH)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      1 - 2 Seat heater temperature 20 °C (68 °F) 2.84 to 3.40 Ω

      If the result is not as specified, replace the front seatback heater assembly LH.

  2. INSPECT FRONT SEATBACK HEATER ASSEMBLY RH


    1. B004NABC02
      *a

      Component without harness connected

      (Front Seatback Heater Assembly RH)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      1 - 2 Seat heater temperature 20 °C (68 °F) 2.84 to 3.40 Ω

      If the result is not as specified, replace the front seatback heater assembly RH.