LUMBAR SUPPORT ADJUSTER ASSEMBLY(for Power Seat) INSTALLATION

CAUTION / NOTICE / HINT

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The following procedure is for LHD vehicles.

  • Use the same procedure for the RH side and LH side.

  • The following procedure is for the LH side.

PROCEDURE


  1. INSTALL FRONT SEATBACK EDGE PROTECTOR

    Click here

  2. INSTALL LUMBAR SUPPORT ADJUSTER ASSEMBLY


    1. B0070P2C01
      B006ZFL Install in this Direction

      Install the lumbar support adjuster assembly to the front seatback frame sub-assembly as shown in the illustration.

    2. B0071A0

      Engage the 2 claws to install the 2 front seatback edge protectors to the front seatback frame sub-assembly.

    3. B006Z1HC01
      *a Clamp (A)
      *b Clamp (B)

      Engage the clamp (B).

    4. Connect the lumbar support adjuster assembly connector.

    5. w/ Climate Control Seat System:


      1. Engage the clamp (A).

  3. INSTALL SEATBACK CLIMATE CONTROL BLOWER (w/ Climate Control Seat System)

    Click here

  4. INSTALL SEPARATE TYPE FRONT SEATBACK COVER WITH PAD

    Click here

  5. INSTALL FRONT SEAT HEADREST SUPPORT

    Click here

  6. INSTALL SEPARATE TYPE FRONT SEATBACK ASSEMBLY

    Click here

  7. INSTALL FRONT SEAT INNER CUSHION SHIELD

    Click here

  8. INSTALL FRONT SEAT CUSHION SHIELD

    Click here

  9. INSTALL FRONT SEAT FRONT CUSHION SHIELD

    Click here

  10. CONNECT SEPARATE TYPE FRONT SEATBACK COVER

    Click here

  11. INSTALL FRONT SEAT ASSEMBLY

    Click here