REAR SEAT ASSEMBLY(for Reclining Seat Type)

Click here

CAUTION / NOTICE / HINT

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.

Click here

PROCEDURE

Click here
INSTALL REAR SIDE SEATBACK ASSEMBLY LH
1. Place the rear side seatback assembly LH in the cabin.
  
  Note:
  Be careful not to damage the vehicle body.
2. Engage the hook and install the rear side seatback assembly LH with the bolt.
  
  18 N*m 184 kgf*cm 13 ft.*lbf
Click here
CONNECT REAR DOOR OPENING TRIM WEATHERSTRIP LH

Click here
Click here
INSTALL REAR SIDE SEATBACK ASSEMBLY RH

Tip:
Use the same procedure as for the LH side.
Click here
CONNECT REAR DOOR OPENING TRIM WEATHERSTRIP RH

Click here
Click here
INSTALL CENTER SEATBACK ASSEMBLY
1. Place the center seatback assembly in the cabin.
  
  Note:
  Be careful not to damage the vehicle body.
2. Install in this Direction
  
  Engage the hook as shown in the illustration.
3. Engage the 2 guides.
4. Install the center seatback assembly with the 2 bolts.
  
  18 N*m 184 kgf*cm 13 ft.*lbf
5. Connect the connector.
Click here
INSTALL REAR SEATBACK ASSEMBLY LH
1. w/ Seat Heater System:
  1. Engage the clamp.
  2. Connect the connector.
2. Place the rear seatback assembly LH in the cabin.
  
  Note:
  Be careful not to damage the vehicle body.
3. Install the rear seatback assembly LH with the 2 bolts and 2 nuts.
  
  18 N*m 184 kgf*cm 13 ft.*lbf
4. Engage the 2 hooks to connect the cover to the package tray trim panel assembly.
5. Connect the rear seat outer belt assembly LH to the rear seat shoulder belt guide LH.
Click here
INSTALL REAR SEATBACK ASSEMBLY RH
1. w/ Seat Heater System:
  1. Engage the clamp.
2. Place the rear seatback assembly RH in the cabin.
  
  Note:
  Be careful not to damage the vehicle body.
3. Install the rear seatback assembly RH with the 2 bolts and 2 nuts.
  
  18 N*m 184 kgf*cm 13 ft.*lbf
4. Engage the 2 hooks to connect the cover to the package tray trim panel assembly.
5. Connect each rear seat outer belt to the rear seat shoulder belt guide RH and rear seat center shoulder belt guide.
Click here
INSTALL REAR SEATBACK COVER
1. Engage the 4 claws to install the 2 rear seatback covers to the rear seatback assembly LH.
  
  Tip:
  Use the same procedure for the RH side and the LH side.
Click here
INSTALL REAR SEAT CUSHION LOCK HOOK
1. Install in this Direction
  
  Engage the 2 claws to install a new rear seat cushion lock hook as shown in the illustration.
  
  Tip:
  Use the same procedure for the RH side and LH side.

Click here

INSTALL REAR SEAT CUSHION ASSEMBLY

w/ Seat Heater System:
1. Connect each connector.
Place the rear seat cushion assembly in the cabin.

Note:
Be careful not to damage the vehicle body.

*a	Rear Seat Cushion Frame Hook (Front Side)
*b	Rear Seat Cushion Frame Hook (Rear Side)
	Install in this Direction (1)
	Install in this Direction (2)

Engage the 2 rear seat cushion frame hooks on the rear side of the rear seat cushion assembly as shown in the illustration.

Engage the 2 rear seat cushion frame hooks on the front side of the rear seat cushion assembly as shown in the illustration to install the rear seat cushion assembly.

Note:
Confirm that the rear seat cushion assembly is securely installed.

Click here
CONNECT REAR CENTER SEAT OUTER BELT ASSEMBLY
1. Install in this Direction
  
  Connect the rear center seat outer belt assembly as shown in the illustration.
Click here
INSTALL REAR CENTER SEAT HEADREST ASSEMBLY
1. Install the rear center seat headrest assembly.
Click here
INSTALL REAR SEAT HEADREST ASSEMBLY
1. Install the rear seat headrest assembly.
  
  Tip:
  Use the same procedure for the RH side and LH side.

REAR SEAT ASSEMBLY(for Reclining Seat Type) INSTALLATION