REAR SEAT ASSEMBLY(for Reclining Seat Type) REASSEMBLY

CAUTION / NOTICE / HINT

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.

PROCEDURE


  1. INSTALL REAR SEAT CUSHION HEATER ASSEMBLY (w/ Seat Heater System)

    Click here

  2. INSTALL BENCH TYPE REAR SEAT CUSHION COVER

    Tech Tips

    When installing a bench type rear seat cushion cover, refer to Precaution in order to prevent wrinkles from forming.

    Click here


    1. Engage the 24 claws.

      B006YR8

      Note

      Be careful not to damage the bench type rear seat cushion cover.

    2. Engage the 20 hooks.

      B006YE0

      Note

      Be careful not to damage the bench type rear seat cushion cover.

    3. Using hog ring pliers, install 2 new hog rings.

      B006ZEM

      Note


      • Be careful not to damage the bench type rear seat cushion cover.

      • Be sure to securely install the hog rings as shown in the illustration while preventing wrinkles from forming on the bench type rear seat cushion cover.

    4. Using hog ring pliers, install 6 new hog rings.

      B00712X

      Note


      • Be careful not to damage the bench type rear seat cushion cover.

      • Be sure to securely install the hog rings as shown in the illustration while preventing wrinkles from forming on the bench type rear seat cushion cover.

    5. Engage the 6 hooks.

      B006Z1R

      Note

      Be careful not to damage the bench type rear seat cushion cover.

    6. Engage the 4 fasteners to install the bench type rear seat cushion cover to the rear seat cushion pad sub-assembly.

      B0070E2C10
      B006Y8C Fastener - -

      Note

      Be careful not to damage the bench type rear seat cushion cover.

  3. INSTALL CHILD RESTRAINT SEAT BASE COVER


    1. B0071SIC01
      B006ZFL Install in this Direction

      Engage the guide and claw as shown in the illustration.

    2. Install the child restraint seat base cover with the screw.

      Tech Tips

      Use the same procedure for all child restraint seat base cover.

  4. INSTALL CHILD RESTRAINT SEAT COVER


    1. B006Y67C01
      B006ZFL Install in this Direction

      Engage the 2 guides and 2 claws to install the child restraint seat cover as shown in the illustration.

      Tech Tips

      Use the same procedure for all child restraint seat covers.

  5. INSTALL REAR SEAT RECLINING ADJUSTER ASSEMBLY LH


    1. B0070N5E01

      Install the rear seat reclining adjuster assembly LH with the 2 bolts and 2 nuts in the order shown in the illustration.

      Torque:
      18 N*m  { 184 kgf*cm, 13 ft.*lbf }

    2. Connect the connector.

  6. INSTALL REAR SEAT RECLINING ADJUSTER ASSEMBLY RH

    Tech Tips

    Use the same procedure as for the LH side.

  7. INSTALL CENTER SEATBACK COVER SUB-ASSEMBLY


    1. Install the center seatback cover sub-assembly to the center seatback pad sub-assembly.

    2. B0071NU

      Engage the 7 hooks to install the center seatback cover with pad to the center seatback frame sub-assembly.

  8. INSTALL REAR SEAT HEADREST SUPPORT (for Center Seat)


    1. B006WXYC01
      B006ZFL Install in this Direction

      Engage the 4 claws to install the 2 rear seat headrest supports as shown in the illustration.

  9. INSTALL REAR CONSOLE BOX WIRE (for Center Seat)


    1. B00707U

      Engage the 3 clamps to install the rear console box wire.

    2. B006ZIN

      Install the rear seat center armrest pad to the rear seat center armrest box.

  10. INSTALL REAR SEAT CENTER ARMREST CUP HOLDER SUB-ASSEMBLY (for Center Seat)


    1. B0071C0C01
      B006ZFL Install in this Direction

      Install the rear seat center armrest cup holder sub-assembly with the 2 screws as shown in the illustration.

    2. B007197

      Disengage the 16 claws to install the 2 rear seat center armrest plates.

    3. B0071G1

      Install the 2 screws and rear seat center armrest cover with pad.

  11. INSTALL COOLER CONTROL SWITCH ASSEMBLY (for Center Seat)


    1. B0071BN

      Connect the 2 connectors.

    2. B006YMQ

      Engage the 4 claws to install the cooler control switch assembly.

  12. INSTALL REAR SEAT CENTER ARMREST ASSEMBLY (for Center Seat)


    1. B006X34

      Engage the 2 clips to install the rear seat center armrest assembly to the rear seat center armrest box assembly.

    2. B006YBB

      Engage the clamp.

  13. INSTALL NO. 1 REAR SEAT CENTER ARMREST BRACKET (for Center Seat)


    1. B006YCR

      Install the No. 1 rear seat center armrest bracket with the 2 bushes and 2 bolts.

    2. Engage the clamp.

  14. INSTALL REAR CENTER SEATBACK FRAME WITH COVER AND PAD (for Center Seat)


    1. B006ZRB

      Engage the 2 claws.

    2. Install the rear center seatback frame with cover and pad with the 2 nuts.

      Torque:
      6.0 N*m  { 61 kgf*cm, 53 in.*lbf }

  15. INSTALL REAR SEATBACK HEATER ASSEMBLY LH (for LH Side)

    w/ Seat Heater System:

    Click here

  16. INSTALL SEPARATE TYPE REAR SEATBACK COVER (for LH Side)

    Tech Tips

    When installing a separate type rear seatback cover, refer to Precaution in order to prevent wrinkles from forming.

    Click here


    1. B0070K4

      Engage the 8 claws to install the separate type rear seatback cover to the separate type rear seatback pad.

      Note

      Be careful not to damage the separate type rear seatback cover.

  17. INSTALL SEPARATE TYPE REAR SEATBACK COVER WITH PAD (for LH Side)


    1. Install the separate type rear seatback cover with pad to the rear seatback frame sub-assembly.

    2. B0070RV

      Engage the 13 hooks.

  18. INSTALL REAR SEAT HEADREST SUPPORT (for LH Side)


    1. B006XPFC01
      B006ZFL Install in this Direction

      Engage the 4 claws to install the 2 rear seat headrest supports as shown in the illustration.

  19. INSTALL REAR SEAT SHOULDER BELT GUIDE LH (for LH Side)


    1. B006ZRW

      Engage the guide.

    2. Install the rear seat shoulder belt guide LH with the 2 screws.

  20. INSTALL REAR SEATBACK HEATER ASSEMBLY RH (for RH Side)

    w/ Seat Heater System:

    Tech Tips

    Use the same procedure as for the LH side.

  21. INSTALL SEPARATE TYPE REAR SEATBACK COVER (for RH Side)

    Tech Tips

    Use the same procedure as for the LH side.

  22. INSTALL SEPARATE TYPE REAR SEATBACK COVER WITH PAD (for RH Side)

    Tech Tips

    Use the same procedure as for the LH side.

  23. INSTALL REAR SEAT HEADREST SUPPORT (for RH Side)

    Tech Tips

    Use the same procedure as for the LH side.

  24. INSTALL REAR SEAT SHOULDER BELT GUIDE RH (for RH Side)

    Tech Tips

    Use the same procedure as for the LH side.

  25. INSTALL REAR SEAT CENTER SHOULDER BELT GUIDE (for RH Side)


    1. B006WSA

      Engage the guide.

    2. Install the rear seat center shoulder belt guide with the 2 screws.

  26. INSTALL REAR SIDE SEATBACK COVER SUB-ASSEMBLY LH (for LH Side)


    1. Install the rear side seatback cover sub-assembly LH to the rear side seatback pad LH.

  27. INSTALL REAR SIDE SEATBACK COVER WITH PAD (for LH Side)


    1. B0070R6C01
      B006ZFL Install in this Direction

      Install the rear side seatback cover with pad to the rear side seatback frame sub-assembly LH as shown in the illustration.

    2. B006WX8

      Engage the 11 hooks.

  28. INSTALL REAR SIDE SEATBACK COVER SUB-ASSEMBLY RH (for RH Side)

    Tech Tips

    Use the same procedure as for the LH side.

  29. INSTALL REAR SIDE SEATBACK COVER WITH PAD (for RH Side)

    Tech Tips

    Use the same procedure as for the LH side.