Click here

REAR SEAT ASSEMBLY(for Reclining Seat Type) REMOVAL

Click here
Click here

CAUTION / NOTICE / HINT

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.

Click here

PROCEDURE


  1. Click here

    REMOVE REAR SEAT HEADREST ASSEMBLY


    1. Remove the rear seat headrest assembly.

      Tip:

      Use the same procedure for the RH side and LH side.

  2. Click here

    REMOVE REAR CENTER SEAT HEADREST ASSEMBLY


    1. Remove the rear center seat headrest assembly.

  3. Click here

    DISCONNECT REAR CENTER SEAT OUTER BELT ASSEMBLY


    1. B006XEEC01
      *a Protective Tape
      B006XFD Insert Screwdriver Here
      B006ZFL Remove in this Direction

      Using a screwdriver with its tip wrapped with protective tape, disconnect the rear center seat outer belt assembly as shown in the illustration.

  4. Click here

    REMOVE REAR SEAT CUSHION ASSEMBLY


    1. B006XTCC01
      *a Rear Seat Cushion Frame Hook (Front Side)
      *b Rear Seat Cushion Frame Hook (Rear Side)
      B006XFD Place Hand Here
      B006ZFL Remove in this Direction (1)
      B006WSJ Remove in this Direction (2)

      Lift the front edge of the rear seat cushion assembly as shown in the illustration and disengage the 2 rear seat cushion frame hooks on the front side of the rear seat cushion assembly from the rear seat cushion lock hooks.

      Note:

      Be sure to hold the parts of the rear seat cushion assembly directly next to the rear seat cushion frame hooks when lifting it. Lifting a different part of the rear seat cushion assembly may deform the rear seat cushion frame.

      Standard Measurement
      Area Measurement
      A 245 mm (9.64 in.)

    2. Disengage the 2 rear seat cushion frame hooks on the rear side of the rear seat cushion assembly as shown in the illustration and remove the rear seat cushion assembly.

      Note:

      Be careful not to damage the vehicle body.

    3. w/ Seat Heater System:


      1. Disconnect each connector.

  5. Click here

    REMOVE REAR SEAT CUSHION LOCK HOOK


    1. B007098C01
      B006ZFL Remove in this Direction

      Disengage the 2 claws to remove the rear seat cushion lock hook as shown in the illustration.

      Tip:

      Use the same procedure for the RH side and LH side.

  6. Click here

    REMOVE REAR SEATBACK COVER


    1. B006YDX

      Disengage the 4 claws and remove the 2 rear seatback covers from the rear seatback assembly LH.

      Tip:

      Use the same procedure for the RH side and the LH side.

  7. Click here

    REMOVE REAR SEATBACK ASSEMBLY LH


    1. Disconnect the rear seat outer belt assembly LH from the rear seat shoulder belt guide LH.

    2. B006Y3T

      Disengage the 2 hooks and disconnect the cover from the package tray trim panel assembly.

    3. B006ZSZC01
      B006Z38 Nut
      B006ZY0 Bolt

      Remove the 2 nuts, 2 bolts and rear seatback assembly LH.

    4. w/ Seat Heater System:


      1. Disconnect the connector.

      2. Disengage the clamp.

  8. Click here

    REMOVE REAR SEATBACK ASSEMBLY RH


    1. Disconnect each rear seat outer belt from the rear seat shoulder belt guide RH and rear seat center shoulder belt guide.

    2. B006XDU

      Disengage the 2 hooks and disconnect the cover from the package tray trim panel assembly.

    3. B00704HC01
      B006Z38 Nut
      B006ZY0 Bolt

      Remove the 2 nuts, 2 bolts and rear seatback assembly RH.

    4. w/ Seat Heater System:


      1. Disengage the clamp.

  9. Click here

    REMOVE CENTER SEATBACK ASSEMBLY


    1. Disconnect the connector.

    2. B006YOGC01
      B006ZFL Remove in this Direction

      Remove the 2 bolts.

    3. Disengage the 2 guides.

    4. Disengage the hook and remove the center seatback assembly as shown in the illustration.

  10. Click here

    DISCONNECT REAR DOOR OPENING TRIM WEATHERSTRIP LH


    1. Disconnect the rear door opening trim weatherstrip LH.

  11. Click here

    REMOVE REAR SIDE SEATBACK ASSEMBLY LH


    1. B0070WI

      Remove the bolt.

    2. Disengage the hook and remove the rear side seatback assembly LH.

      Note:

      Be careful not to damage the vehicle body.

  12. Click here

    DISCONNECT REAR DOOR OPENING TRIM WEATHERSTRIP RH

    Tip:

    Use the same procedure as for the LH side.

  13. Click here

    REMOVE REAR SIDE SEATBACK ASSEMBLY RH

    Tip:

    Use the same procedure as for the LH side.