REAR SEAT ASSEMBLY(for Fixed Seat Type) REMOVAL

CAUTION / NOTICE / HINT

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.

PROCEDURE


  1. DISCONNECT REAR CENTER SEAT OUTER BELT ASSEMBLY


    1. B00702LC01
      *a Protective Tape
      B006XFD Insert Screwdriver Here
      B006ZFL Remove in this Direction

      Using a screwdriver with its tip wrapped with protective tape, disconnect the rear center seat outer belt assembly as shown in the illustration.

  2. REMOVE REAR SEAT CUSHION ASSEMBLY


    1. B006YJFC01
      *a Rear Seat Cushion Frame Hook (Front Side)
      *b Rear Seat Cushion Frame Hook (Rear Side)
      B006XFD Place Hand Here
      B006ZFL Remove in this Direction (1)
      B006WSJ Remove in this Direction (2)

      Lift the front edge of the rear seat cushion assembly as shown in the illustration and disengage the 2 rear seat cushion frame hooks on the front side of the rear seat cushion assembly from the rear seat cushion lock hooks.

      Note

      Be sure to hold the parts of the rear seat cushion assembly directly next to the rear seat cushion frame hooks when lifting it. Lifting a different part of the rear seat cushion assembly may deform the rear seat cushion frame.

      Standard Measurement
      Area Measurement
      A 245 mm (9.64 in.)

    2. Disengage the 2 rear seat cushion frame hooks on the rear side of the rear seat cushion assembly as shown in the illustration and remove the rear seat cushion assembly.

      Note

      Be careful not to damage the vehicle body.

  3. REMOVE REAR SEAT CUSHION LOCK HOOK


    1. B007098C01
      B006ZFL Remove in this Direction

      Disengage the 2 claws and remove the rear seat cushion lock hook as shown in the illustration.

      Tech Tips

      Use the same procedure for the RH side and LH side.

  4. REMOVE REAR SEATBACK ASSEMBLY


    1. Disconnect each rear seat outer belt from the rear seat shoulder belt guide RH, rear seat shoulder belt guide LH and rear seat center shoulder belt guide.

    2. B006WYW

      Remove the 4 bolts.

    3. B0071INC01
      B006ZFL Remove in this Direction

      Disengage the 3 hooks to remove the rear seatback assembly as shown in the illustration.