LUMBAR SWITCH(for Manual Seat) INSPECTION

PROCEDURE


  1. INSPECT FRONT LUMBAR POWER SEAT SWITCH (DRIVER SEAT)


    1. B0070U0C02
      *a Front Lumbar Power Seat (Release)
      *b Front Lumbar Power Seat (Hold)
      *c

      Component without harness connected

      (Front Lumbar Power Seat Switch (Driver Seat))

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      2 - 5 Front lumbar power seat (Hold) pressed Below 1 Ω
      4 - 3
      4 - 5 Off
      4 - 3
      4 - 5 Front lumbar power seat (Release) pressed
      2 - 3

      If the result is not as specified, replace the front lumbar power seat switch (driver seat).