FRONT SEAT ASSEMBLY(for Manual Seat) DISASSEMBLY

CAUTION / NOTICE / HINT

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.

PROCEDURE


  1. REMOVE OCCUPANT DETECTION ECU

    Click here

  2. REMOVE FRONT SEAT INNER BELT ASSEMBLY RH

    Click here

  3. DISCONNECT SEPARATE TYPE FRONT SEATBACK COVER


    1. B004O3G

      Disconnect the rubber band of the separate type front seatback cover.

  4. REMOVE VERTICAL ADJUSTING HANDLE RH


    1. B004LZNC02
      *a Protective Tape
      B006ZFL Remove in this Direction

      Operate the vertical adjusting handle RH and using a screwdriver with its tip wrapped with protective tape, disengage the claw and remove the vertical adjusting handle RH as shown in the illustration.

  5. REMOVE RECLINING HINGE COVER RH


    1. B004LIVC02
      *a Protective Tape

      Using a screwdriver with its tip wrapped with protective tape, disengage the claw.

    2. Disengage the guide to remove the reclining hinge cover RH.

  6. REMOVE RECLINING ADJUSTER RELEASE HANDLE RH


    1. B004JLE

      Remove the reclining adjuster release handle RH.

  7. REMOVE SEAT ADJUSTER COVER CAP RH


    1. B004MMQC02
      *a Protective Tape
      B006ZFL Remove in this Direction (1)
      B006WSJ Remove in this Direction (2)

      Using a screwdriver with its tip wrapped with protective tape, disengage the 2 claws as shown in the illustration.

    2. Disengage the 2 guides to remove the seat adjuster cover cap RH as shown in the illustration.

  8. REMOVE FRONT SEAT CUSHION SHIELD RH


    1. B004MEI

      Disengage the 2 claws.

    2. B004LEA

      Disengage the claw and 2 guides.

    3. B004NWRC01
      *a Protective Tape
      B006ZFL Remove in this Direction

      Using a screwdriver with its tip wrapped with protective tape, disengage the 2 claws and slightly pull the front seat cushion shield RH as shown in the illustration.

    4. B004IA4C01
      B006ZFL Remove in this Direction

      Disengage the guide to remove the front seat cushion shield RH as shown in the illustration.

  9. REMOVE FRONT SEAT INNER CUSHION SHIELD RH


    1. B004II4

      Disengage the 2 claws.

    2. B004K5IC01
      B006ZFL Remove in this Direction

      Disengage the 2 claws and 2 guides to remove the front seat inner cushion shield RH as shown in the illustration.

  10. REMOVE LOWER NO. 2 SEAT TRACK SPACER

    B0070V0

    1. Disengage the claw and guide to remove the lower No. 2 seat track spacer from the front seat inner cushion shield RH.

  11. REMOVE LOWER NO. 1 SEAT TRACK SPACER

    B006ZFP

    1. Disengage the claw and guide to remove the lower No. 1 seat track spacer from the front seat cushion shield RH.

  12. REMOVE SEPARATE TYPE FRONT SEATBACK ASSEMBLY


    1. B004OD6

      Disengage the 2 hooks.

    2. B004JN4

      Disconnect the connector.

    3. Disengage the clamp.

    4. B004M6A

      Disengage the claw and 4 clamps to separate the front seat airbag assembly RH wire harness.

      Tech Tips

      Disengage the 4 clamps first.

    5. B004K38

      Remove the 4 bolts.

    6. Disengage the 4 guides to remove the separate type front seatback assembly from the separate type front seat cushion assembly.

  13. REMOVE FRONT SEAT HEADREST SUPPORT


    1. B004M4F

      Disengage the 3 hooks.

    2. B004IA8

      Disengage the clamp.

    3. B0071BT

      Open the 2 fasteners.

    4. B0070PE

      Disengage the 4 claws and remove the 2 front seat headrest supports.

  14. REMOVE SEPARATE TYPE FRONT SEATBACK COVER WITH PAD


    1. Remove the separate type front seatback cover with pad.

  15. REMOVE SEPARATE TYPE FRONT SEATBACK COVER


    1. Using a screwdriver, disengage the 9 claws and remove the separate type front seatback cover from the separate type front seatback pad as shown in the illustration.

      B004ILBC01
      *a Screwdriver - -

  16. REMOVE FRONT SEATBACK HEATER ASSEMBLY RH

    Click here

  17. REMOVE FRONT SEAT AIRBAG ASSEMBLY RH

    Click here

  18. REMOVE FRONT SEATBACK SPRING SUB-ASSEMBLY RH


    1. B004MLS

      Disengage the 2 claws to separate the 2 front seatback edge protectors from the front seatback frame sub-assembly RH.

    2. B004HL1C02
      B006ZFL Remove in this Direction

      Remove the front seatback spring sub-assembly RH from the front seatback frame sub-assembly RH as shown in the illustration.

  19. REMOVE FRONT SEATBACK EDGE PROTECTOR


    1. Remove the 2 front seatback edge protectors from the front seatback spring sub-assembly RH.

  20. REMOVE FRONT NO. 1 SEATBACK HOOK


    1. B00714G

      Remove the 2 front No. 1 seatback hooks from the front seatback frame sub-assembly RH.

  21. REMOVE SEPARATE TYPE FRONT SEAT CUSHION COVER WITH PAD


    1. B004HNS

      Disconnect the connector and disengage the clamp.

    2. B004N7W

      Disengage the 2 hooks.

    3. Disengage the 10 hooks and remove the separate type front seat cushion cover with pad from the separate type front seat cushion spring assembly.

      B004LXQ

  22. REMOVE SEPARATE TYPE FRONT SEAT CUSHION COVER


    1. Using a screwdriver, disengage the 14 claws and remove the separate type front seat cushion cover from the separate type front seat cushion pad as shown in the illustration.

      B004HRYC01
      *a Screwdriver - -

  23. REMOVE FRONT SEAT CUSHION HEATER ASSEMBLY RH

    Click here

  24. REMOVE RH SEAT RECLINING ADJUSTER INSIDE COVER LH


    1. B004M3C

      Disengage the 4 claws to remove the RH seat reclining adjuster inside cover LH.

  25. REMOVE RH SEAT RECLINING ADJUSTER INSIDE COVER RH

    Tech Tips

    Use the same procedure as for the LH side.

  26. REMOVE FRONT SEAT LOWER CUSHION SHIELD LH


    1. B004LRCC02
      *a Hook
      *b Guide

      Disengage the hook.

    2. Disengage the claw and guide to remove the front seat lower cushion shield LH.

  27. REMOVE FRONT SEAT LOWER CUSHION SHIELD RH


    1. B004HJMC02
      *a Hook
      *b Guide

      Disengage the hook.

    2. Disengage the claw and guide to remove the front seat lower cushion shield RH.

  28. REMOVE SEAT HEATER CONTROL SUB-ASSEMBLY RH

    Click here

  29. REMOVE FRONT SEAT WIRE


    1. Disconnect each connector and disengage each clamp to remove the front seat wire.

  30. REMOVE FRONT SEAT WIRE RH


    1. Disconnect each connector and disengage each clamp to remove the front seat wire RH.

  31. REMOVE FRONT SEAT CUSHION WIRE HARNESS HOLDER RH


    1. B004N1G

      Remove the 2 screws.

    2. Disengage the claw to remove the front seat cushion wire harness holder RH.

  32. REMOVE FRONT SEAT CUSHION SPRING SUB-ASSEMBLY RH


    1. B004I89

      Disengage the 6 hooks to remove the front seat cushion spring sub-assembly RH from the front seat adjuster assembly RH.

  33. REMOVE SEAT TRACK ADJUSTING HANDLE


    1. B004HJZ

      Disengage the 2 claws to remove the seat track adjusting handle from the front seat adjuster assembly RH.

  34. REMOVE FRONT SEAT VERTICAL ADJUSTER ASSEMBLY


    1. Remove the front seat vertical adjuster assembly.


      1. B004KV2

        Remove the 3 nuts and vertical adjuster plate.

      2. B004HXK

        Remove the vertical adjuster spacer.

      3. B004L1K

        Remove the front vertical adjuster brake sub-assembly RH.

  35. REMOVE VERTICAL ADJUSTER BRACKET COVER RH


    1. B004J94

      Disengage the claw to remove the vertical adjuster bracket cover RH from the front vertical adjuster brake sub-assembly RH.