SEAT MEMORY SWITCH INSPECTION

PROCEDURE


  1. INSPECT SEAT MEMORY SWITCH (DRIVER DOOR)


    1. B006XXQC01
      *a SET Switch
      *b M1 Switch
      *c M2 Switch
      *d

      Component without harness connected

      (Seat Memory Switch (Driver Door))

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      2 - 1 M1 switch pressed Below 1 Ω
      1 switch not pressed 10 kΩ or higher
      5 - 1 M2 switch pressed Below 1 Ω
      2 switch not pressed 10 kΩ or higher
      3 - 1 SET switch pressed Below 1 Ω
      SET switch not pressed 10 kΩ or higher
      If the result is not as specified, replace the seat memory switch (driver door).