FRONT POWER SEAT CONTROL SYSTEM DESCRIPTION
The driver seat is equipped with slide, reclining, lifter, front vertical and lumbar support adjustment functions.
The memory call function uses the key ID code of each electrical key transmitter sub-assembly to memorize and recall the appropriate driving position for each individual who possesses a master key or sub key.
FUNCTION OF MAIN COMPONENT
| Component | Function | |
|---|---|---|
| Position control ECU assembly (driver seat) | Receives position signals from the position sensors. Outputs seat adjuster signals to the front seat adjuster assembly (driver seat), front seatback frame sub-assembly (driver seat) or lumbar support adjuster assembly (driver seat) to adjust the seat accordingly. | |
| Front seat adjuster assembly (driver seat) | Slide motor | Receives signals from the position control ECU assembly (driver seat), and slides the seat forward and rearward. |
| Power seat tilt motor assembly (driver seat) | Receives signals from the position control ECU assembly (driver seat), and raises and lowers the front of the seat cushion. | |
| power seat lifter motor assembly (driver seat) | Receives signals from the position control ECU assembly (driver seat), and raises and lowers the seat cushion. | |
| Front seatback frame sub-assembly (driver seat) | Reclining motor | Receives signals from the position control ECU assembly (driver seat), and tilts the seatback forward and rearward. |
| Position sensor | Built into each motor and send position signals to the position control ECU assembly (driver seat) to detect the position of the seat. | |
| Lumbar support adjuster assembly (driver seat) | Receives signals from the position control ECU assembly (driver seat) and operates the built-in motor to adjust the lumbar support. | |
| Seat memory switch (driver door) | If the SET switch is being pressed when one of the M1 or M2 seat memory switches is pressed, or if one of the M1 or M2 switches is pressed within 3 seconds of pressing the SET switch, the outer mirror control ECU assembly (driver door) sends the signals so that the seat position can be stored. Then, when a seat memory switch (driver door) is pressed, a signal is sent to the outer mirror control ECU assembly (driver door) and the seat position changes according to memory. |
|
SYSTEM OPERATION
The front power seat functions which can be operated by the power seat motors and memorized are shown below.
| Seat Function | Driver Seat |
|---|---|
| Slide | Power and Memory |
| Reclining | Power and Memory |
| Front Vertical | Power and Memory |
| Lifter | Power and Memory |
| Lumbar Support Adjustment | Power |
The seat memory switch sends memory switch information to the outer mirror control ECU assembly. Then the information is sent to the main body ECU (multiplex network body ECU) via CAN communication and then an instruction to memorize the seat position is sent to the position control ECU assembly via CAN communication. As a result, the seat position is memorized.