Click here

PRE-COLLISION SYSTEM CUSTOMIZE PARAMETERS

Click here
Click here
Click here
  1. Note:

    • When the customer requests a change in a function, first make sure that the function can be customized.

    • Make a note of the current settings before customizing.

    Tip:

    The following PCS functions and the pre-collision system sensitivity setting can be changed from their default setting.

    CUSTOMIZE PRE-COLLISION SYSTEM


    1. Customizing with the GTS


      1. Turn the ignition switch off.

      2. Connect the GTS to the DLC3.

      3. Turn the ignition switch to ON.

      4. Turn the GTS on.

      5. Enter the following menus: Customize Setting / Others.

      6. Select the setting by referring to the table below.


        1. Others
          Tester Display Description Default Setting ECU
          PCS Operation State Retention Setting Refer to the table below OFF 0:OFF,1:ON Millimeter wave radar sensor assembly
          PCS Alarm Activation Distance Retention Setting 1 Refer to the table below OFF 0:OFF,1:ON Millimeter wave radar sensor assembly
          PCS Alarm Activation Distance Retention Setting 2 Refer to the table below ON 0:OFF,1:ON Millimeter wave radar sensor assembly
          PCS Alarm Activation Distance Retention Setting 3 Refer to the table below OFF 0:OFF,1:ON Millimeter wave radar sensor assembly






        Customize Setting Description Setting
        PCS Operation State Retention Setting Function to maintain the pre-collision system on/off setting when the ignition switch is turned off and then to ON.

        OFF: Not maintained (Pre-collision system always turns on)

        ON: Maintained
        PCS Alarm Activation Distance Retention Setting 1 Function to maintain the sensitivity setting of the pre-collision system when the pre-collision system is turned off and then on.

        OFF: Not maintained (Setting changes to "Mid")

        ON: Maintained
        PCS Alarm Activation Distance Retention Setting 2 Function to maintain the sensitivity setting of the pre-collision system when the ignition switch is turned off while the pre-collision system is on.

        OFF: Not maintained (Setting changes to "Mid")

        ON: Maintained
        PCS Alarm Activation Distance Retention Setting 3 Function to maintain the sensitivity setting of the pre-collision system when the ignition switch is turned off while the pre-collision system is off.

        OFF: Not maintained (Setting changes to "Mid")

        ON: Maintained