SIDE AIRBAG SENSOR(for Front Door) ON-VEHICLE INSPECTION

CAUTION / NOTICE / HINT

CAUTION:

Be sure to correctly follow the removal and installation procedures for the door side airbag sensors.

B004NZ8

PROCEDURE


  1. INSPECT DOOR SIDE AIRBAG SENSOR (for Vehicle not Involved in Collision)


    1. Perform a diagnostic system check.

      Click here

  2. INSPECT DOOR SIDE AIRBAG SENSOR (for Vehicle Involved in Collision and Airbag not Deployed)


    1. Perform a diagnostic system check.

      Click here

    2. Visually check the door side airbag sensors for defects if a front door of the vehicle or the area around a front door is damaged.

      Tech Tips

      The defects are as follows:


      • Cracks in the sensor housing

      • Dents in the sensor housing

      • Chips in the sensor housing

      • Cracks or other damage to the connector

      • Damage to the waterproof rubber seal

      OK
      No defects are found.

      If any defects are found, replace the door side airbag sensor with a new one.

  3. INSPECT DOOR SIDE AIRBAG SENSOR (for Vehicle Involved in Collision and Airbag is Deployed)


    1. When airbags have deployed as the result of a collision, be sure to replace all door side airbag sensors in the damaged areas (anywhere in need of repair).

    2. Visually check the door side airbag sensors in undamaged areas for defects.

      Tech Tips

      The defects are as follows:


      • Cracks in the sensor housing

      • Dents in the sensor housing

      • Chips in the sensor housing

      • Cracks or other damage to the connector

      • Damage to the waterproof rubber seal

      OK
      No defects are found.

      If any defects are found or a door side airbag sensor has detected a major collision, replace the door side airbag sensor with a new one.