METER / GAUGE SYSTEM, Diagnostic DTC:B132187

DTC Code DTC Name
B132187 Lost Communication with EMV Missing Message

DESCRIPTION

The combination meter assembly and radio and display receiver assembly communicate via local bus communication. This allows audio and visual system or navigation system information to be displayed on the multi-information display.

This DTC is stored when a communication error occurs between the radio and display receiver assembly and combination meter assembly.

DTC No. Detection Item DTC Detection Condition Trouble Area Memory Note
B132187 Lost Communication with EMV Missing Message

Diagnosis Condition:


  • The ignition switch is ON

  • IG power source voltage is 9.5 V or more

Malfunction Status:


  • No communication with radio and display receiver assembly

Malfunction Time:


  • 3.0 seconds or more

  • Harness or connector

  • Radio and display receiver assembly

  • Meter mirror sub-assembly*

  • Combination meter assembly

 DTC stored w/ No. 1 Stereo Jack Adapter Assembly (for 7 Inch Multi-information Display)

WIRING DIAGRAM


  1. B0070LME03

CAUTION / NOTICE / HINT

Note

When replacing the combination meter assembly, always replace it with a new one. If a combination meter assembly which was installed to another vehicle is used, the information stored in it will not match the information from the vehicle and a DTC may be stored.

PROCEDURE


  1. CONFIRM MODEL


    1. Choose the model to be inspected.

      Result
      Result Proceed to
      w/o Headup Display System A
      w/ Headup Display System B

    B

    CHECK FOR DTC (NAVIGATION SYSTEM) Click here

    A

  2. CONFIRM MODEL


    1. Choose the model to be inspected.

      Result
      Result Proceed to
      w/o Navigation System A
      w/ Navigation System B

    B

    CHECK FOR DTC (NAVIGATION SYSTEM) Click here

    A

  3. CHECK FOR DTC (AUDIO AND VISUAL SYSTEM)


    1. Check if audio and visual system DTCs are output.


      Body Electrical > Navigation System > Trouble Codes
      Result
      Result Proceed to
      DTCs are not output A
      DTCs are output B

    A

    GO TO STEP 5 Click here

    B

    GO TO AUDIO AND VISUAL SYSTEM Click here

  4. CHECK FOR DTC (NAVIGATION SYSTEM)


    1. Check if navigation system DTCs are output.


      Body Electrical > Navigation System > Trouble Codes
      Result
      Result Proceed to
      DTCs are not output A
      DTCs are output B

    B

    GO TO NAVIGATION SYSTEM Click here

    A

  5. REPLACE COMBINATION METER ASSEMBLY


    1. Replace the combination meter assembly with a new one.

      Click here

    2. Turn the ignition switch to ON and wait 3 seconds.

      Note

      A minimum of 3 seconds is required to send/receive the registration information between the combination meter assembly and radio and display receiver assembly.

    3. Operate the steering pad switch assembly and check that the audio tab illuminates.

    4. Check if meter / gauge system DTCs are output.


      Body Electrical > Combination Meter > Trouble Codes
      Result
      Result Proceed to
      The audio tab illuminates and DTC B132187 is not output A
      The audio tab does not illuminate and DTC B132187 is output B

    A

    END (COMBINATION METER ASSEMBLY WAS DEFECTIVE)

    B

    REPLACE RADIO AND DISPLAY RECEIVER ASSEMBLY Click here

  6. CHECK FOR DTC (NAVIGATION SYSTEM)


    1. Check if navigation system DTCs are output.


      Body Electrical > Navigation System > Trouble Codes
      Result
      Result Proceed to
      DTCs are not output A
      DTCs are output B

    B

    GO TO NAVIGATION SYSTEM Click here

    A

  7. CHECK FOR DTC (HEADUP DISPLAY SYSTEM)


    1. Check if headup display system DTCs are output.


      Body Electrical > Head Up Display > Trouble Codes
      Result
      Result Proceed to
      DTC B132187 is not output A
      DTC B132187 is output B

    A

    REPLACE COMBINATION METER ASSEMBLY Click here

    B

    REPLACE RADIO AND DISPLAY RECEIVER ASSEMBLY Click here