When the customer requests a change in a function, first make sure that the function can be customized.
Be sure to make a note of the current settings before customizing.
When troubleshooting a function, first make sure that the function is set to the default setting.
The following items can be customized.
CUSTOMIZE METER / GAUGE SYSTEM
Customizing with the GTS
Connect the GTS to the DLC3.
Turn the ignition switch to ON.
Turn the GTS on.
Enter the following menus: Customize Setting / Warning or Display.
Select the setting by referring to the table below.
| Tester Display | Description | Default | Setting | ECU |
|---|---|---|---|---|
| Flasher Sound Volume Adjust | Function to change the flasher sound volume | Medium | $02:Large,$00:Medium,$01:Small | Combination meter assembly |
| Suggestion Service Function | Function to change the suggestion service display setting | ON | 00:OFF,01:Only Parked,11:ON | Main body ECU (Multiplex network body ECU) |
| Tester Display | Description | Default | Setting | ECU |
|---|---|---|---|---|
| ODO Display Time After IG OFF Adjust | Function to change the ODO display time after the ignition switch is turned off | 30s | $00:30s,$01:60s,$02:600s,$03:OFF | Combination meter assembly |
| ECO Drive Indicator Zone Display Function (Meter) | Function to enable/disable the eco driving indicator zone | ON | $00:OFF,$01:ON | Combination meter assembly |
Customizing with the multi-display
Turn the ignition switch to ON.
Enter the following menus: MENU / Setup / Vehicle / Vehicle Customisation / Convenience services.
Select the setting by referring to the table below.
| Display | Default | Content | Setting | Relevant ECU |
|---|---|---|---|---|
| Convenience services | On | Function to change the suggestion service display setting | On, On During, Off | Main body ECU (Multiplex network body ECU) |