COMBINATION METER DISASSEMBLY

CAUTION / NOTICE / HINT

Note


  • When removing and installing the combination meter glass, make sure not to touch the display panel.

  • Do not allow any dirt, fingerprints, grease, etc., to adhere to the combination meter glass. If the glass is dirty, wipe it clean with a soft cloth.

PROCEDURE


  1. REMOVE COMBINATION METER GLASS (for Type A)


    1. B004LMZC01
      B006ZFL Remove in this Direction

      Disengage the 8 claws to remove the combination meter glass.

  2. REMOVE COMBINATION METER GLASS (for Type B)


    1. B004MA0

      Using a "TORX" driver T10, remove the 8 screws.

      Note

      Do not remove the rear cover from the combination meter assembly as foreign matter may enter the combination meter assembly and cause a malfunction.

      B004K0AC02
      *1 Rear Cover
    2. B004LILC02
      B006ZFL Remove in this Direction

      Remove the combination meter glass as shown in the illustration.

      Note

      Make sure to only remove the combination meter glass.